threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
35 lines
918 B
Plaintext
35 lines
918 B
Plaintext
Texas Instruments AFE4403 Heart rate and Pulse Oximeter
|
|
|
|
Required properties:
|
|
- compatible : Should be "ti,afe4403".
|
|
- reg : SPI chip select address of device.
|
|
- tx-supply : Regulator supply to transmitting LEDs.
|
|
- interrupt-parent : Phandle to he parent interrupt controller.
|
|
- interrupts : The interrupt line the device ADC_RDY pin is
|
|
connected to. For details refer to,
|
|
../../interrupt-controller/interrupts.txt.
|
|
|
|
Optional properties:
|
|
- reset-gpios : GPIO used to reset the device.
|
|
For details refer to, ../../gpio/gpio.txt.
|
|
|
|
For other required and optional properties of SPI slave nodes
|
|
please refer to ../../spi/spi-bus.txt.
|
|
|
|
Example:
|
|
|
|
&spi0 {
|
|
heart_mon@0 {
|
|
compatible = "ti,afe4403";
|
|
reg = <0>;
|
|
spi-max-frequency = <10000000>;
|
|
|
|
tx-supply = <&vbat>;
|
|
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <28 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|