threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
38 lines
1.3 KiB
Plaintext
38 lines
1.3 KiB
Plaintext
* Texas Instruments' ADC12130/ADC12132/ADC12138
|
|
|
|
Required properties:
|
|
- compatible: Should be one of
|
|
* "ti,adc12130"
|
|
* "ti,adc12132"
|
|
* "ti,adc12138"
|
|
- reg: SPI chip select number for the device
|
|
- interrupts: Should contain interrupt for EOC (end of conversion)
|
|
- clocks: phandle to conversion clock input
|
|
- spi-max-frequency: Definision as per
|
|
Documentation/devicetree/bindings/spi/spi-bus.txt
|
|
- vref-p-supply: The regulator supply for positive analog voltage reference
|
|
|
|
Optional properties:
|
|
- vref-n-supply: The regulator supply for negative analog voltage reference
|
|
(Note that this must not go below GND or exceed vref-p)
|
|
If not specified, this is assumed to be analog ground.
|
|
- ti,acquisition-time: The number of conversion clock periods for the S/H's
|
|
acquisition time. Should be one of 6, 10, 18, 34. If not specified,
|
|
default value of 10 is used.
|
|
For high source impedances, this value can be increased to 18 or 34.
|
|
For less ADC accuracy and/or slower CCLK frequencies this value may be
|
|
decreased to 6. See section 6.0 INPUT SOURCE RESISTANCE in the
|
|
datasheet for details.
|
|
|
|
Example:
|
|
adc@0 {
|
|
compatible = "ti,adc12138";
|
|
reg = <0>;
|
|
interrupts = <28 IRQ_TYPE_EDGE_RISING>;
|
|
interrupt-parent = <&gpio1>;
|
|
clocks = <&cclk>;
|
|
vref-p-supply = <&ldo4_reg>;
|
|
spi-max-frequency = <5000000>;
|
|
ti,acquisition-time = <6>;
|
|
};
|