Files
android/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt
T
threeeye bc1d038eac REVVL 6 Pro kernel bring-up: full working tree snapshot (2026-09-12)
Squashed backup commit (no shallow-clone history issues) of
xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream
commit 9eece662e) plus all fixes applied to get everpal_defconfig building
clean against a modern (GCC 15.2.0) toolchain -- see the previous commit
message on the lineage-23.2 branch (also in this repo history is not
available here since this is a squashed snapshot; full incremental history
lives in the local DL380 checkout and the upstream GitHub remote).

Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
2026-09-12 13:36:46 +00:00

45 lines
1.6 KiB
Plaintext

* Renesas USB DMA Controller Device Tree bindings
Required Properties:
-compatible: "renesas,<soctype>-usb-dmac", "renesas,usb-dmac" as fallback.
Examples with soctypes are:
- "renesas,r8a7790-usb-dmac" (R-Car H2)
- "renesas,r8a7791-usb-dmac" (R-Car M2-W)
- "renesas,r8a7793-usb-dmac" (R-Car M2-N)
- "renesas,r8a7794-usb-dmac" (R-Car E2)
- "renesas,r8a7795-usb-dmac" (R-Car H3)
- "renesas,r8a7796-usb-dmac" (R-Car M3-W)
- reg: base address and length of the registers block for the DMAC
- interrupts: interrupt specifiers for the DMAC, one for each entry in
interrupt-names.
- interrupt-names: one entry per channel, named "ch%u", where %u is the
channel number ranging from zero to the number of channels minus one.
- clocks: a list of phandle + clock-specifier pairs.
- #dma-cells: must be <1>, the cell specifies the channel number of the DMAC
port connected to the DMA client.
- dma-channels: number of DMA channels
Example: R8A7790 (R-Car H2) USB-DMACs
usb_dmac0: dma-controller@e65a0000 {
compatible = "renesas,r8a7790-usb-dmac", "renesas,usb-dmac";
reg = <0 0xe65a0000 0 0x100>;
interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH
0 109 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&mstp3_clks R8A7790_CLK_USBDMAC0>;
#dma-cells = <1>;
dma-channels = <2>;
};
usb_dmac1: dma-controller@e65b0000 {
compatible = "renesas,usb-dmac";
reg = <0 0xe65b0000 0 0x100>;
interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH
0 110 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&mstp3_clks R8A7790_CLK_USBDMAC1>;
#dma-cells = <1>;
dma-channels = <2>;
};