threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
32 lines
999 B
Plaintext
32 lines
999 B
Plaintext
JDI model LT070ME05000 1200x1920 7" DSI Panel
|
|
|
|
Required properties:
|
|
- compatible: should be "jdi,lt070me05000"
|
|
- vddp-supply: phandle of the regulator that provides the supply voltage
|
|
Power IC supply (3-5V)
|
|
- iovcc-supply: phandle of the regulator that provides the supply voltage
|
|
IOVCC , power supply for LCM (1.8V)
|
|
- enable-gpios: phandle of gpio for enable line
|
|
LED_EN, LED backlight enable, High active
|
|
- reset-gpios: phandle of gpio for reset line
|
|
This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names
|
|
XRES, Reset, Low active
|
|
- dcdc-en-gpios: phandle of the gpio for power ic line
|
|
Power IC supply enable, High active
|
|
|
|
Example:
|
|
|
|
dsi0: qcom,mdss_dsi@4700000 {
|
|
panel@0 {
|
|
compatible = "jdi,lt070me05000";
|
|
reg = <0>;
|
|
|
|
vddp-supply = <&pm8921_l17>;
|
|
iovcc-supply = <&pm8921_lvs7>;
|
|
|
|
enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
|
|
reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
|
|
dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|