threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
36 lines
1.4 KiB
Plaintext
36 lines
1.4 KiB
Plaintext
|
|
What: /sys/class/net/<iface>/grcan/enable0
|
|
Date: October 2012
|
|
KernelVersion: 3.8
|
|
Contact: Andreas Larsson <andreas@gaisler.com>
|
|
Description:
|
|
Hardware configuration of physical interface 0. This file reads
|
|
and writes the "Enable 0" bit of the configuration register.
|
|
Possible values: 0 or 1. See the GRCAN chapter of the GRLIB IP
|
|
core library documentation for details. The default value is 0
|
|
or set by the module parameter grcan.enable0 and can be read at
|
|
/sys/module/grcan/parameters/enable0.
|
|
|
|
What: /sys/class/net/<iface>/grcan/enable1
|
|
Date: October 2012
|
|
KernelVersion: 3.8
|
|
Contact: Andreas Larsson <andreas@gaisler.com>
|
|
Description:
|
|
Hardware configuration of physical interface 1. This file reads
|
|
and writes the "Enable 1" bit of the configuration register.
|
|
Possible values: 0 or 1. See the GRCAN chapter of the GRLIB IP
|
|
core library documentation for details. The default value is 0
|
|
or set by the module parameter grcan.enable1 and can be read at
|
|
/sys/module/grcan/parameters/enable1.
|
|
|
|
What: /sys/class/net/<iface>/grcan/select
|
|
Date: October 2012
|
|
KernelVersion: 3.8
|
|
Contact: Andreas Larsson <andreas@gaisler.com>
|
|
Description:
|
|
Configuration of which physical interface to be used. Possible
|
|
values: 0 or 1. See the GRCAN chapter of the GRLIB IP core
|
|
library documentation for details. The default value is 0 or is
|
|
set by the module parameter grcan.select and can be read at
|
|
/sys/module/grcan/parameters/select.
|