threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
92 lines
2.0 KiB
C
92 lines
2.0 KiB
C
/*
|
|
* Simple gptimers example
|
|
* http://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:drivers:gptimers
|
|
*
|
|
* Copyright 2007-2009 Analog Devices Inc.
|
|
*
|
|
* Licensed under the GPL-2 or later.
|
|
*/
|
|
|
|
#include <linux/interrupt.h>
|
|
#include <linux/module.h>
|
|
|
|
#include <asm/gptimers.h>
|
|
#include <asm/portmux.h>
|
|
|
|
/* ... random driver includes ... */
|
|
|
|
#define DRIVER_NAME "gptimer_example"
|
|
|
|
#ifdef IRQ_TIMER5
|
|
#define SAMPLE_IRQ_TIMER IRQ_TIMER5
|
|
#else
|
|
#define SAMPLE_IRQ_TIMER IRQ_TIMER2
|
|
#endif
|
|
|
|
struct gptimer_data {
|
|
uint32_t period, width;
|
|
};
|
|
static struct gptimer_data data;
|
|
|
|
/* ... random driver state ... */
|
|
|
|
static irqreturn_t gptimer_example_irq(int irq, void *dev_id)
|
|
{
|
|
struct gptimer_data *data = dev_id;
|
|
|
|
/* make sure it was our timer which caused the interrupt */
|
|
if (!get_gptimer_intr(TIMER5_id))
|
|
return IRQ_NONE;
|
|
|
|
/* read the width/period values that were captured for the waveform */
|
|
data->width = get_gptimer_pwidth(TIMER5_id);
|
|
data->period = get_gptimer_period(TIMER5_id);
|
|
|
|
/* acknowledge the interrupt */
|
|
clear_gptimer_intr(TIMER5_id);
|
|
|
|
/* tell the upper layers we took care of things */
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* ... random driver code ... */
|
|
|
|
static int __init gptimer_example_init(void)
|
|
{
|
|
int ret;
|
|
|
|
/* grab the peripheral pins */
|
|
ret = peripheral_request(P_TMR5, DRIVER_NAME);
|
|
if (ret) {
|
|
printk(KERN_NOTICE DRIVER_NAME ": peripheral request failed\n");
|
|
return ret;
|
|
}
|
|
|
|
/* grab the IRQ for the timer */
|
|
ret = request_irq(SAMPLE_IRQ_TIMER, gptimer_example_irq,
|
|
IRQF_SHARED, DRIVER_NAME, &data);
|
|
if (ret) {
|
|
printk(KERN_NOTICE DRIVER_NAME ": IRQ request failed\n");
|
|
peripheral_free(P_TMR5);
|
|
return ret;
|
|
}
|
|
|
|
/* setup the timer and enable it */
|
|
set_gptimer_config(TIMER5_id,
|
|
WDTH_CAP | PULSE_HI | PERIOD_CNT | IRQ_ENA);
|
|
enable_gptimers(TIMER5bit);
|
|
|
|
return 0;
|
|
}
|
|
module_init(gptimer_example_init);
|
|
|
|
static void __exit gptimer_example_exit(void)
|
|
{
|
|
disable_gptimers(TIMER5bit);
|
|
free_irq(SAMPLE_IRQ_TIMER, &data);
|
|
peripheral_free(P_TMR5);
|
|
}
|
|
module_exit(gptimer_example_exit);
|
|
|
|
MODULE_LICENSE("BSD");
|