threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
55 lines
2.0 KiB
C
55 lines
2.0 KiB
C
/*
|
|
* upd6408x - NEC Electronics 3-Dimensional Y/C separation input defines
|
|
*
|
|
* 2006 by Hans Verkuil (hverkuil@xs4all.nl)
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#ifndef _UPD64083_H_
|
|
#define _UPD64083_H_
|
|
|
|
/* There are two bits of information that the driver needs in order
|
|
to select the correct routing: the operating mode and the selection
|
|
of the Y input (external or internal).
|
|
|
|
The first two operating modes expect a composite signal on the Y input,
|
|
the second two operating modes use both the Y and C inputs.
|
|
|
|
Normally YCS_MODE is used for tuner and composite inputs, and the
|
|
YCNR mode is used for S-Video inputs.
|
|
|
|
The external Y-ADC is selected when the composite input comes from a
|
|
upd64031a ghost reduction device. If this device is not present, or
|
|
the input is a S-Video signal, then the internal Y-ADC input should
|
|
be used. */
|
|
|
|
/* Operating modes: */
|
|
|
|
/* YCS mode: Y/C separation (burst locked clocking) */
|
|
#define UPD64083_YCS_MODE 0
|
|
/* YCS+ mode: 2D Y/C separation and YCNR (burst locked clocking) */
|
|
#define UPD64083_YCS_PLUS_MODE 1
|
|
|
|
/* Note: the following two modes cannot be used in combination with the
|
|
external Y-ADC. */
|
|
/* MNNR mode: frame comb type YNR+C delay (line locked clocking) */
|
|
#define UPD64083_MNNR_MODE 2
|
|
/* YCNR mode: frame recursive YCNR (burst locked clocking) */
|
|
#define UPD64083_YCNR_MODE 3
|
|
|
|
/* Select external Y-ADC: this should be set if this device is used in
|
|
combination with the upd64031a ghost reduction device.
|
|
Otherwise leave at 0 (use internal Y-ADC). */
|
|
#define UPD64083_EXT_Y_ADC (1 << 2)
|
|
|
|
#endif
|