threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
64 lines
1.6 KiB
C
64 lines
1.6 KiB
C
/*
|
|
* drivers/pci/setup-irq.c
|
|
*
|
|
* Extruded from code written by
|
|
* Dave Rusling (david.rusling@reo.mts.dec.com)
|
|
* David Mosberger (davidm@cs.arizona.edu)
|
|
* David Miller (davem@redhat.com)
|
|
*
|
|
* Support routines for initializing a PCI subsystem.
|
|
*/
|
|
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/cache.h>
|
|
#include "pci.h"
|
|
|
|
void pci_assign_irq(struct pci_dev *dev)
|
|
{
|
|
u8 pin;
|
|
u8 slot = -1;
|
|
int irq = 0;
|
|
struct pci_host_bridge *hbrg = pci_find_host_bridge(dev->bus);
|
|
|
|
if (!(hbrg->map_irq)) {
|
|
dev_dbg(&dev->dev, "runtime IRQ mapping not provided by arch\n");
|
|
return;
|
|
}
|
|
|
|
/* If this device is not on the primary bus, we need to figure out
|
|
which interrupt pin it will come in on. We know which slot it
|
|
will come in on 'cos that slot is where the bridge is. Each
|
|
time the interrupt line passes through a PCI-PCI bridge we must
|
|
apply the swizzle function. */
|
|
|
|
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
|
|
/* Cope with illegal. */
|
|
if (pin > 4)
|
|
pin = 1;
|
|
|
|
if (pin) {
|
|
/* Follow the chain of bridges, swizzling as we go. */
|
|
if (hbrg->swizzle_irq)
|
|
slot = (*(hbrg->swizzle_irq))(dev, &pin);
|
|
|
|
/*
|
|
* If a swizzling function is not used map_irq must
|
|
* ignore slot
|
|
*/
|
|
irq = (*(hbrg->map_irq))(dev, slot, pin);
|
|
if (irq == -1)
|
|
irq = 0;
|
|
}
|
|
dev->irq = irq;
|
|
|
|
dev_dbg(&dev->dev, "assign IRQ: got %d\n", dev->irq);
|
|
|
|
/* Always tell the device, so the driver knows what is
|
|
the real IRQ to use; the device does not use it. */
|
|
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
|
|
}
|