threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
33 lines
995 B
Plaintext
33 lines
995 B
Plaintext
Binding for Thermal Sensor driver for STMicroelectronics STi series of SoCs.
|
|
|
|
Required parameters:
|
|
-------------------
|
|
|
|
compatible : Should be "st,stih407-thermal"
|
|
|
|
clock-names : Should be "thermal".
|
|
See: Documentation/devicetree/bindings/resource-names.txt
|
|
clocks : Phandle of the clock used by the thermal sensor.
|
|
See: Documentation/devicetree/bindings/clock/clock-bindings.txt
|
|
|
|
Optional parameters:
|
|
-------------------
|
|
|
|
reg : For non-sysconf based sensors, this should be the physical base
|
|
address and length of the sensor's registers.
|
|
interrupts : Standard way to define interrupt number.
|
|
NB: For thermal sensor's for which no interrupt has been
|
|
defined, a polling delay of 1000ms will be used to read the
|
|
temperature from device.
|
|
|
|
Example:
|
|
|
|
temp0@91a0000 {
|
|
compatible = "st,stih407-thermal";
|
|
reg = <0x91a0000 0x28>;
|
|
clock-names = "thermal";
|
|
clocks = <&CLK_SYSIN>;
|
|
interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
|
|
st,passive_cooling_temp = <110>;
|
|
};
|