threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
44 lines
1.1 KiB
Plaintext
44 lines
1.1 KiB
Plaintext
Device tree bindings for Goodix GT9xx series touchscreen controller
|
|
|
|
Required properties:
|
|
|
|
- compatible : Should be "goodix,gt911"
|
|
or "goodix,gt9110"
|
|
or "goodix,gt912"
|
|
or "goodix,gt927"
|
|
or "goodix,gt9271"
|
|
or "goodix,gt928"
|
|
or "goodix,gt967"
|
|
- reg : I2C address of the chip. Should be 0x5d or 0x14
|
|
- interrupt-parent : Interrupt controller to which the chip is connected
|
|
- interrupts : Interrupt to which the chip is connected
|
|
|
|
Optional properties:
|
|
|
|
- irq-gpios : GPIO pin used for IRQ. The driver uses the
|
|
interrupt gpio pin as output to reset the device.
|
|
- reset-gpios : GPIO pin used for reset
|
|
|
|
- touchscreen-inverted-x : X axis is inverted (boolean)
|
|
- touchscreen-inverted-y : Y axis is inverted (boolean)
|
|
- touchscreen-swapped-x-y : X and Y axis are swapped (boolean)
|
|
(swapping is done after inverting the axis)
|
|
|
|
Example:
|
|
|
|
i2c@00000000 {
|
|
/* ... */
|
|
|
|
gt928@5d {
|
|
compatible = "goodix,gt928";
|
|
reg = <0x5d>;
|
|
interrupt-parent = <&gpio>;
|
|
interrupts = <0 0>;
|
|
|
|
irq-gpios = <&gpio1 0 0>;
|
|
reset-gpios = <&gpio1 1 0>;
|
|
};
|
|
|
|
/* ... */
|
|
};
|