threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
37 lines
1.2 KiB
Plaintext
37 lines
1.2 KiB
Plaintext
Xilinx LogiCORE Partial Reconfig Decoupler Softcore
|
|
|
|
The Xilinx LogiCORE Partial Reconfig Decoupler manages one or more
|
|
decouplers / fpga bridges.
|
|
The controller can decouple/disable the bridges which prevents signal
|
|
changes from passing through the bridge. The controller can also
|
|
couple / enable the bridges which allows traffic to pass through the
|
|
bridge normally.
|
|
|
|
The Driver supports only MMIO handling. A PR region can have multiple
|
|
PR Decouplers which can be handled independently or chained via decouple/
|
|
decouple_status signals.
|
|
|
|
Required properties:
|
|
- compatible : Should contain "xlnx,pr-decoupler-1.00" followed by
|
|
"xlnx,pr-decoupler"
|
|
- regs : base address and size for decoupler module
|
|
- clocks : input clock to IP
|
|
- clock-names : should contain "aclk"
|
|
|
|
Optional properties:
|
|
- bridge-enable : 0 if driver should disable bridge at startup
|
|
1 if driver should enable bridge at startup
|
|
Default is to leave bridge in current state.
|
|
|
|
See Documentation/devicetree/bindings/fpga/fpga-region.txt for generic bindings.
|
|
|
|
Example:
|
|
fpga-bridge@100000450 {
|
|
compatible = "xlnx,pr-decoupler-1.00",
|
|
"xlnx-pr-decoupler";
|
|
regs = <0x10000045 0x10>;
|
|
clocks = <&clkc 15>;
|
|
clock-names = "aclk";
|
|
bridge-enable = <0>;
|
|
};
|