threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
31 lines
945 B
Plaintext
31 lines
945 B
Plaintext
* Samsung AHCI SATA Controller
|
|
|
|
SATA nodes are defined to describe on-chip Serial ATA controllers.
|
|
Each SATA controller should have its own node.
|
|
|
|
Required properties:
|
|
- compatible : compatible list, contains "samsung,exynos5-sata"
|
|
- interrupts : <interrupt mapping for SATA IRQ>
|
|
- reg : <registers mapping>
|
|
- samsung,sata-freq : <frequency in MHz>
|
|
- phys : Must contain exactly one entry as specified
|
|
in phy-bindings.txt
|
|
- phy-names : Must be "sata-phy"
|
|
|
|
Optional properties:
|
|
- clocks : Must contain an entry for each entry in clock-names.
|
|
- clock-names : Shall be "sata" for the external SATA bus clock,
|
|
and "sclk_sata" for the internal controller clock.
|
|
|
|
Example:
|
|
sata@122f0000 {
|
|
compatible = "snps,dwc-ahci";
|
|
samsung,sata-freq = <66>;
|
|
reg = <0x122f0000 0x1ff>;
|
|
interrupts = <0 115 0>;
|
|
clocks = <&clock 277>, <&clock 143>;
|
|
clock-names = "sata", "sclk_sata";
|
|
phys = <&sata_phy>;
|
|
phy-names = "sata-phy";
|
|
};
|