threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
479 lines
10 KiB
Devicetree
479 lines
10 KiB
Devicetree
/*
|
|
* Copyright (C) 2015 MediaTek Inc.
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
/dts-v1/;
|
|
/plugin/;
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/pinctrl/mt6785-pinfunc.h>
|
|
|
|
&reserved_memory {
|
|
};
|
|
|
|
/* chosen */
|
|
&chosen {
|
|
/* fpga may has no lk, we need to specify display info here */
|
|
/* fb buffer is reserved using this dts by memory node above */
|
|
|
|
atag,videolfb-fb_base_l = <0x7e605000>;
|
|
atag,videolfb-fb_base_h = <0x0>;
|
|
atag,videolfb-islcmfound = <1>;
|
|
atag,videolfb-islcm_inited = <0>;
|
|
atag,videolfb-fps= <6000>;
|
|
atag,videolfb-vramSize= <0x017e8000>;
|
|
atag,videolfb-lcmname=
|
|
"r66451_fhdp_dsi_cmd_tianma_drv";
|
|
};
|
|
|
|
|
|
&i2c2 {
|
|
clock-frequency = <400000>;
|
|
|
|
mtk-usb@60 {
|
|
compatible = "mediatek,mtk-usb";
|
|
reg = <0x60>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
/* accdet start */
|
|
&accdet {
|
|
/* accdet micbias voltage: 0x09:2.85v 0x08:2.8v 0x07,
|
|
* 2.7v;0x05,2.5v;0x02,1.9v
|
|
*/
|
|
accdet-mic-vol = <8>;
|
|
/* accdet pwm_width, pwm_thresh, fall_delay, rise_delay
|
|
* debounce0, debounce1, debounce3, debounce4
|
|
* eint pwm_width, eint pwm_thresh
|
|
* eint deb(debounce0, debounce1, debounce2, debounce3), inv_debounce
|
|
*/
|
|
headset-mode-setting = <0x500 0x500 1 0x1f0
|
|
0x800 0x800 0x20 0x44
|
|
0x4 0x1
|
|
0x5 0x3 0x3 0x5 0xe>;
|
|
accdet-plugout-debounce = <1>;
|
|
/*1:ACC mode, 2:low cost without in bias, 6:low cost with in bias*/
|
|
accdet-mic-mode = <2>;
|
|
/*0--MD_MAX--UP_MAX--DW_MAX*/
|
|
headset-three-key-threshold = <0 80 220 400>;
|
|
headset-three-key-threshold-CDD = <0 121 192 600>;
|
|
/*0--MD_MAX--VOICE_MAX--UP_MAX--DW_MAX*/
|
|
headset-four-key-threshold = <0 58 121 192 400>;
|
|
|
|
/* select VTH to 2v and 500k, use internal resitance */
|
|
eint_use_ext_res = <0>;
|
|
status = "okay";
|
|
};
|
|
/* accdet end */
|
|
|
|
&odm {
|
|
led0:led@0 {
|
|
compatible = "mediatek,red";
|
|
led_mode = <0>;
|
|
data = <1>;
|
|
pwm_config = <0 0 0 0 0>;
|
|
};
|
|
led1:led@1 {
|
|
compatible = "mediatek,green";
|
|
led_mode = <0>;
|
|
data = <1>;
|
|
pwm_config = <0 0 0 0 0>;
|
|
};
|
|
led2:led@2 {
|
|
compatible = "mediatek,blue";
|
|
led_mode = <0>;
|
|
data = <1>;
|
|
pwm_config = <0 0 0 0 0>;
|
|
};
|
|
led3:led@3 {
|
|
compatible = "mediatek,jogball-backlight";
|
|
led_mode = <0>;
|
|
data = <1>;
|
|
pwm_config = <0 0 0 0 0>;
|
|
};
|
|
led4:led@4 {
|
|
compatible = "mediatek,keyboard-backlight";
|
|
led_mode = <0>;
|
|
data = <1>;
|
|
pwm_config = <0 0 0 0 0>;
|
|
};
|
|
led5:led@5 {
|
|
compatible = "mediatek,button-backlight";
|
|
led_mode = <0>;
|
|
data = <1>;
|
|
pwm_config = <0 0 0 0 0>;
|
|
};
|
|
led6:led@6 {
|
|
compatible = "mediatek,lcd-backlight";
|
|
led_mode = <5>;
|
|
data = <1>;
|
|
pwm_config = <0 1 0 0 0>;
|
|
};
|
|
vibrator0:vibrator@0 {
|
|
compatible = "mediatek,vibrator";
|
|
vib_timer = <25>;
|
|
vib_limit = <9>;
|
|
vib_vol= <9>;
|
|
};
|
|
|
|
usb_c_pinctrl:usb_c_pinctrl {
|
|
compatible = "mediatek,usb_c_pinctrl";
|
|
};
|
|
};
|
|
|
|
/* DISPSYS GPIO standardization */
|
|
&pio {
|
|
mtkfb_pins_lcd_bias_enp1: lcd_bias_enp1_gpio {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO23__FUNC_GPIO23>;
|
|
slew-rate = <1>;
|
|
output-high;
|
|
};
|
|
};
|
|
|
|
mtkfb_pins_lcd_bias_enp0: lcd_bias_enp0_gpio {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO23__FUNC_GPIO23>;
|
|
slew-rate = <1>;
|
|
output-low;
|
|
};
|
|
};
|
|
|
|
mtkfb_pins_lcd_bias_enn1: lcd_bias_enn1_gpio {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO202__FUNC_GPIO202>;
|
|
slew-rate = <1>;
|
|
output-high;
|
|
};
|
|
};
|
|
|
|
mtkfb_pins_lcd_bias_enn0: lcd_bias_enn0_gpio {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO202__FUNC_GPIO202>;
|
|
slew-rate = <1>;
|
|
output-low;
|
|
};
|
|
};
|
|
|
|
mtkfb_pins_lcm_rst_out1_gpio: lcm_rst_out1_gpio {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO44__FUNC_GPIO44>;
|
|
slew-rate = <1>;
|
|
output-high;
|
|
};
|
|
};
|
|
|
|
mtkfb_pins_lcm_rst_out0_gpio: lcm_rst_out0_gpio {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO44__FUNC_GPIO44>;
|
|
slew-rate = <1>;
|
|
output-low;
|
|
};
|
|
};
|
|
mtkfb_pins_lcm_dsi_te: lcm_dsi_te {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO43__FUNC_DSI_TE>;
|
|
};
|
|
};
|
|
|
|
mtkfb_pins_6382_rst_out1_gpio: 6382_rst_out1_gpio {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO57__FUNC_GPIO57>;
|
|
slew-rate = <1>;
|
|
output-high;
|
|
};
|
|
};
|
|
|
|
mtkfb_pins_6382_rst_out0_gpio: 6382_rst_out0_gpio {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO57__FUNC_GPIO57>;
|
|
slew-rate = <1>;
|
|
output-low;
|
|
};
|
|
};
|
|
};
|
|
|
|
&mtkfb {
|
|
pinctrl-names = "lcd_bias_enp1_gpio", "lcd_bias_enp0_gpio",
|
|
"lcd_bias_enn1_gpio", "lcd_bias_enn0_gpio",
|
|
"lcm_rst_out1_gpio", "lcm_rst_out0_gpio",
|
|
"mode_te_te", "6382_rst_out1_gpio", "6382_rst_out0_gpio";
|
|
pinctrl-0 = <&mtkfb_pins_lcd_bias_enp1>;
|
|
pinctrl-1 = <&mtkfb_pins_lcd_bias_enp0>;
|
|
pinctrl-2 = <&mtkfb_pins_lcd_bias_enn1>;
|
|
pinctrl-3 = <&mtkfb_pins_lcd_bias_enn0>;
|
|
pinctrl-4 = <&mtkfb_pins_lcm_rst_out1_gpio>;
|
|
pinctrl-5 = <&mtkfb_pins_lcm_rst_out0_gpio>;
|
|
pinctrl-6 = <&mtkfb_pins_lcm_dsi_te>;
|
|
pinctrl-7 = <&mtkfb_pins_6382_rst_out1_gpio>;
|
|
pinctrl-8 = <&mtkfb_pins_6382_rst_out0_gpio>;
|
|
status = "okay";
|
|
};
|
|
|
|
/* DISPSYS GPIO standardization end */
|
|
&mt6360_pmu {
|
|
mt6360,intr_gpio_num = <16>; /* direct defined GPIO num */
|
|
mt6360,intr_gpio = <&pio 16 0x0>;
|
|
};
|
|
|
|
&mt6360_typec {
|
|
mt6360pd,intr_gpio_num = <7>; /* direct defined GPIO num */
|
|
mt6360pd,intr_gpio = <&pio 7 0x0>;
|
|
mt6360pd,pcb_gpio = <&pio 5 0x0>;
|
|
mt6360pd,pcb_gpio_num = <5>;
|
|
mt6360pd,pcb_gpio_polarity = <1>;
|
|
};
|
|
|
|
/* USB SWITCH GPIO start */
|
|
&pio {
|
|
usb_default: usb_default {
|
|
};
|
|
|
|
gpio_redriver_c1_init: c1_init {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO31__FUNC_GPIO31>;
|
|
slew-rate = <1>;
|
|
output-low;
|
|
};
|
|
};
|
|
|
|
gpio_redriver_c1_low: c1_low {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO31__FUNC_GPIO31>;
|
|
slew-rate = <1>;
|
|
output-low;
|
|
};
|
|
};
|
|
|
|
gpio_redriver_c1_hiz: c1_highz {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO31__FUNC_GPIO31>;
|
|
slew-rate= <0>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
gpio_redriver_c1_high: c1_high {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO31__FUNC_GPIO31>;
|
|
slew-rate = <1>;
|
|
output-high;
|
|
};
|
|
};
|
|
|
|
gpio_redriver_c2_init: c2_init {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO30__FUNC_GPIO30>;
|
|
slew-rate = <1>;
|
|
output-low;
|
|
};
|
|
};
|
|
|
|
gpio_redriver_c2_low: c2_low {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO30__FUNC_GPIO30>;
|
|
slew-rate = <1>;
|
|
output-low;
|
|
};
|
|
};
|
|
|
|
gpio_redriver_c2_hiz: c2_highz {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO30__FUNC_GPIO30>;
|
|
slew-rate= <0>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
gpio_redriver_c2_high: c2_high {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO30__FUNC_GPIO30>;
|
|
slew-rate = <1>;
|
|
output-high;
|
|
};
|
|
};
|
|
|
|
gpio_u3_switch_sel1: u3_sw_sel1 {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO32__FUNC_GPIO32>;
|
|
slew-rate = <1>;
|
|
output-low;
|
|
};
|
|
};
|
|
|
|
gpio_u3_switch_sel2: u3_sw_sel2 {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO32__FUNC_GPIO32>;
|
|
slew-rate = <1>;
|
|
output-high;
|
|
};
|
|
};
|
|
|
|
gpio_u3_switch_enable: u3_sw_en {
|
|
};
|
|
|
|
gpio_u3_switch_disable: u3_sw_dis {
|
|
};
|
|
};
|
|
|
|
&usb_c_pinctrl {
|
|
pinctrl-names = "usb_default",
|
|
"redrv_c1_init",
|
|
"redrv_c1_low",
|
|
"redrv_c1_hiz",
|
|
"redrv_c1_high",
|
|
"redrv_c2_init",
|
|
"redrv_c2_low",
|
|
"redrv_c2_hiz",
|
|
"redrv_c2_high",
|
|
"switch_sel1",
|
|
"switch_sel2",
|
|
"switch_enable",
|
|
"switch_disable";
|
|
|
|
pinctrl-0 = <&usb_default>;
|
|
pinctrl-1 = <&gpio_redriver_c1_init>;
|
|
pinctrl-2 = <&gpio_redriver_c1_low>;
|
|
pinctrl-3 = <&gpio_redriver_c1_hiz>;
|
|
pinctrl-4 = <&gpio_redriver_c1_high>;
|
|
pinctrl-5 = <&gpio_redriver_c2_init>;
|
|
pinctrl-6 = <&gpio_redriver_c2_low>;
|
|
pinctrl-7 = <&gpio_redriver_c2_hiz>;
|
|
pinctrl-8 = <&gpio_redriver_c2_high>;
|
|
pinctrl-9 = <&gpio_u3_switch_sel1>;
|
|
pinctrl-10 = <&gpio_u3_switch_sel2>;
|
|
pinctrl-11 = <&gpio_u3_switch_enable>;
|
|
pinctrl-12 = <&gpio_u3_switch_disable>;
|
|
status = "okay";
|
|
|
|
usb_switch-data {
|
|
en_pin_num = <0>;
|
|
en_pin_val = <0>;
|
|
sel_pin_num = <32>;
|
|
sel_pin_val = <1>;
|
|
c1_pin_num = <31>;
|
|
c1_pin_val = <2>;
|
|
c2_pin_num = <30>;
|
|
c2_pin_val = <1>;
|
|
};
|
|
};
|
|
/* USB SWITCH GPIO end */
|
|
|
|
/* CONSYS GPIO standardization */
|
|
&pio {
|
|
consys_pins_default: consys_default {
|
|
};
|
|
gpslna_pins_init: gpslna@0 {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
|
|
slew-rate = <0>;
|
|
bias-disable;
|
|
output-low;
|
|
};
|
|
};
|
|
gpslna_pins_oh: gpslna@1 {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
|
|
slew-rate = <1>;
|
|
output-high;
|
|
};
|
|
};
|
|
gpslna_pins_ol: gpslna@2 {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
|
|
slew-rate = <1>;
|
|
output-low;
|
|
};
|
|
};
|
|
};
|
|
&consys {
|
|
pinctrl-names = "default", "gps_lna_state_init",
|
|
"gps_lna_state_oh", "gps_lna_state_ol";
|
|
pinctrl-0 = <&consys_pins_default>;
|
|
pinctrl-1 = <&gpslna_pins_init>;
|
|
pinctrl-2 = <&gpslna_pins_oh>;
|
|
pinctrl-3 = <&gpslna_pins_ol>;
|
|
status = "okay";
|
|
};
|
|
/* CONSYS end */
|
|
|
|
/* CAMERA specify sensor */
|
|
&kd_camera_hw1 {
|
|
cam2_enable_sensor = "imx350_mipi_raw imx386_mipi_mono";
|
|
};
|
|
/* CAMERA specify sensor end */
|
|
|
|
/* IRTX GPIO Start */
|
|
&irtx_pwm {
|
|
pinctrl-names = "irtx_gpio_led_default", "irtx_gpio_led_set";
|
|
pinctrl-0 = <&irtx_gpio_led_default>;
|
|
pinctrl-1 = <&irtx_gpio_led_set>;
|
|
status = "okay";
|
|
};
|
|
&pio {
|
|
/* IRTX GPIO Settings -Start */
|
|
/* default: GPIO0, output, high */
|
|
irtx_gpio_led_default:irtx_gpio_led_def@gpio26 {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO26__FUNC_GPIO26>;
|
|
slew-rate = <1>;
|
|
bias-disable;
|
|
output-low;
|
|
input-schmitt-enable = <0>;
|
|
};
|
|
};
|
|
|
|
irtx_gpio_led_set:irtx_gpio_led_set@gpio26 {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO26__FUNC_PWM_0>;
|
|
slew-rate = <1>;
|
|
output-high;
|
|
};
|
|
};
|
|
}; /* IRTX GPIO Settings -End */
|
|
|
|
&spi2 {
|
|
status = "okay";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spislv_pins_default>;
|
|
spislv@0 {
|
|
compatible = "mediatek,spi_slave";
|
|
reg = <0>;
|
|
spi-max-frequency = <55000000>;
|
|
spi-tx-bus-width = <1>;
|
|
spi-rx-bus-width = <1>;
|
|
low-speed-tick-delay = /bits/ 8 <1>;
|
|
low-speed-early-trans = /bits/ 8 <0>;
|
|
high-speed-tick-delay = /bits/ 8 <2>;
|
|
high-speed-early-trans = /bits/ 8 <1>;
|
|
slave-drive-strength = /bits/ 8 <3>;
|
|
};
|
|
};
|
|
&pio {
|
|
spislv_pins_default: spislv_mode_default {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO63__FUNC_SPI2_MI>,
|
|
<PINMUX_GPIO65__FUNC_SPI2_MO>,
|
|
<PINMUX_GPIO66__FUNC_SPI2_CLK>,
|
|
<PINMUX_GPIO64__FUNC_SPI2_CSB>;
|
|
drive-strength = <3>;
|
|
};
|
|
};
|
|
};
|
|
|
|
#include <k85v1_64_6382_cmd/cust.dtsi>
|
|
#include "mediatek/cust_mt6785_camera.dtsi"
|
|
#include "mediatek/cust_mt6785_touch_1080x2340.dtsi"
|
|
/*End of this file, DO NOT ADD ANYTHING HERE*/
|