threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
30 lines
810 B
Plaintext
30 lines
810 B
Plaintext
Lantiq Synchronous Serial Controller (SSC) SPI master driver
|
|
|
|
Required properties:
|
|
- compatible: "lantiq,ase-spi", "lantiq,falcon-spi", "lantiq,xrx100-spi"
|
|
- #address-cells: see spi-bus.txt
|
|
- #size-cells: see spi-bus.txt
|
|
- reg: address and length of the spi master registers
|
|
- interrupts: should contain the "spi_rx", "spi_tx" and "spi_err" interrupt.
|
|
|
|
|
|
Optional properties:
|
|
- clocks: spi clock phandle
|
|
- num-cs: see spi-bus.txt, set to 8 if unset
|
|
- base-cs: the number of the first chip select, set to 1 if unset.
|
|
|
|
Example:
|
|
|
|
|
|
spi: spi@E100800 {
|
|
compatible = "lantiq,xrx200-spi", "lantiq,xrx100-spi";
|
|
reg = <0xE100800 0x100>;
|
|
interrupt-parent = <&icu0>;
|
|
interrupts = <22 23 24>;
|
|
interrupt-names = "spi_rx", "spi_tx", "spi_err";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
num-cs = <6>;
|
|
base-cs = <1>;
|
|
};
|