Files
android/Documentation/devicetree/bindings/sound/img,i2s-in.txt
T
threeeye bc1d038eac REVVL 6 Pro kernel bring-up: full working tree snapshot (2026-09-12)
Squashed backup commit (no shallow-clone history issues) of
xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream
commit 9eece662e) plus all fixes applied to get everpal_defconfig building
clean against a modern (GCC 15.2.0) toolchain -- see the previous commit
message on the lineage-23.2 branch (also in this repo history is not
available here since this is a squashed snapshot; full incremental history
lives in the local DL380 checkout and the upstream GitHub remote).

Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
2026-09-12 13:36:46 +00:00

48 lines
1.3 KiB
Plaintext

Imagination Technologies I2S Input Controller
Required Properties:
- compatible : Compatible list, must contain "img,i2s-in"
- #sound-dai-cells : Must be equal to 0
- reg : Offset and length of the register set for the device
- clocks : Contains an entry for each entry in clock-names
- clock-names : Must include the following entry:
"sys" The system clock
- dmas: Contains an entry for each entry in dma-names.
- dma-names: Must include the following entry:
"rx" Single DMA channel used by all active I2S channels
- img,i2s-channels : Number of I2S channels instantiated in the I2S in block
Optional Properties:
- interrupts : Contains the I2S in interrupts. Depending on
the configuration, there may be no interrupts, one interrupt,
or an interrupt per I2S channel. For the case where there is
one interrupt per channel, the interrupts should be listed
in ascending channel order
- resets: Contains a phandle to the I2S in reset signal
- reset-names: Contains the reset signal name "rst"
Example:
i2s_in: i2s-in@18100800 {
compatible = "img,i2s-in";
reg = <0x18100800 0x200>;
interrupts = <GIC_SHARED 7 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&mdc 30 0xffffffff 0>;
dma-names = "rx";
clocks = <&cr_periph SYS_CLK_I2S_IN>;
clock-names = "sys";
img,i2s-channels = <6>;
#sound-dai-cells = <0>;
};