threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
34 lines
1014 B
Plaintext
34 lines
1014 B
Plaintext
* STMicroelectronics SAS. ST33ZP24 TPM SoC
|
|
|
|
Required properties:
|
|
- compatible: Should be "st,st33zp24-spi".
|
|
- spi-max-frequency: Maximum SPI frequency (<= 10000000).
|
|
|
|
Optional ST33ZP24 Properties:
|
|
- interrupt-parent: phandle for the interrupt gpio controller
|
|
- interrupts: GPIO interrupt to which the chip is connected
|
|
- lpcpd-gpios: Output GPIO pin used for ST33ZP24 power management D1/D2 state.
|
|
If set, power must be present when the platform is going into sleep/hibernate mode.
|
|
|
|
Optional SoC Specific Properties:
|
|
- pinctrl-names: Contains only one value - "default".
|
|
- pintctrl-0: Specifies the pin control groups used for this controller.
|
|
|
|
Example (for ARM-based BeagleBoard xM with ST33ZP24 on SPI4):
|
|
|
|
&mcspi4 {
|
|
|
|
|
|
st33zp24@0 {
|
|
|
|
compatible = "st,st33zp24-spi";
|
|
|
|
spi-max-frequency = <10000000>;
|
|
|
|
interrupt-parent = <&gpio5>;
|
|
interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
lpcpd-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|