threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
134 lines
3.2 KiB
Plaintext
134 lines
3.2 KiB
Plaintext
* Dialog Semiconductor DA9211/DA9212/DA9213/DA9214/DA9215 Voltage Regulator
|
|
|
|
Required properties:
|
|
- compatible: "dlg,da9211" or "dlg,da9212" or "dlg,da9213"
|
|
or "dlg,da9214" or "dlg,da9215"
|
|
- reg: I2C slave address, usually 0x68.
|
|
- interrupts: the interrupt outputs of the controller
|
|
- regulators: A node that houses a sub-node for each regulator within the
|
|
device. Each sub-node is identified using the node's name, with valid
|
|
values listed below. The content of each sub-node is defined by the
|
|
standard binding for regulators; see regulator.txt.
|
|
BUCKA and BUCKB.
|
|
|
|
Optional properties:
|
|
- enable-gpios: platform gpio for control of BUCKA/BUCKB.
|
|
- Any optional property defined in regulator.txt
|
|
|
|
Example 1) DA9211
|
|
|
|
pmic: da9211@68 {
|
|
compatible = "dlg,da9211";
|
|
reg = <0x68>;
|
|
interrupts = <3 27>;
|
|
|
|
regulators {
|
|
BUCKA {
|
|
regulator-name = "VBUCKA";
|
|
regulator-min-microvolt = < 300000>;
|
|
regulator-max-microvolt = <1570000>;
|
|
regulator-min-microamp = <2000000>;
|
|
regulator-max-microamp = <5000000>;
|
|
enable-gpios = <&gpio 27 0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
Example 2) DA9212
|
|
|
|
pmic: da9212@68 {
|
|
compatible = "dlg,da9212";
|
|
reg = <0x68>;
|
|
interrupts = <3 27>;
|
|
|
|
regulators {
|
|
BUCKA {
|
|
regulator-name = "VBUCKA";
|
|
regulator-min-microvolt = < 300000>;
|
|
regulator-max-microvolt = <1570000>;
|
|
regulator-min-microamp = <2000000>;
|
|
regulator-max-microamp = <5000000>;
|
|
enable-gpios = <&gpio 27 0>;
|
|
};
|
|
BUCKB {
|
|
regulator-name = "VBUCKB";
|
|
regulator-min-microvolt = < 300000>;
|
|
regulator-max-microvolt = <1570000>;
|
|
regulator-min-microamp = <2000000>;
|
|
regulator-max-microamp = <5000000>;
|
|
enable-gpios = <&gpio 17 0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
Example 3) DA9213
|
|
pmic: da9213@68 {
|
|
compatible = "dlg,da9213";
|
|
reg = <0x68>;
|
|
interrupts = <3 27>;
|
|
|
|
regulators {
|
|
BUCKA {
|
|
regulator-name = "VBUCKA";
|
|
regulator-min-microvolt = < 300000>;
|
|
regulator-max-microvolt = <1570000>;
|
|
regulator-min-microamp = <3000000>;
|
|
regulator-max-microamp = <6000000>;
|
|
enable-gpios = <&gpio 27 0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
Example 4) DA9214
|
|
pmic: da9214@68 {
|
|
compatible = "dlg,da9214";
|
|
reg = <0x68>;
|
|
interrupts = <3 27>;
|
|
|
|
regulators {
|
|
BUCKA {
|
|
regulator-name = "VBUCKA";
|
|
regulator-min-microvolt = < 300000>;
|
|
regulator-max-microvolt = <1570000>;
|
|
regulator-min-microamp = <3000000>;
|
|
regulator-max-microamp = <6000000>;
|
|
enable-gpios = <&gpio 27 0>;
|
|
};
|
|
BUCKB {
|
|
regulator-name = "VBUCKB";
|
|
regulator-min-microvolt = < 300000>;
|
|
regulator-max-microvolt = <1570000>;
|
|
regulator-min-microamp = <3000000>;
|
|
regulator-max-microamp = <6000000>;
|
|
enable-gpios = <&gpio 17 0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
Example 5) DA9215
|
|
pmic: da9215@68 {
|
|
compatible = "dlg,da9215";
|
|
reg = <0x68>;
|
|
interrupts = <3 27>;
|
|
|
|
regulators {
|
|
BUCKA {
|
|
regulator-name = "VBUCKA";
|
|
regulator-min-microvolt = < 300000>;
|
|
regulator-max-microvolt = <1570000>;
|
|
regulator-min-microamp = <4000000>;
|
|
regulator-max-microamp = <7000000>;
|
|
enable-gpios = <&gpio 27 0>;
|
|
};
|
|
BUCKB {
|
|
regulator-name = "VBUCKB";
|
|
regulator-min-microvolt = < 300000>;
|
|
regulator-max-microvolt = <1570000>;
|
|
regulator-min-microamp = <4000000>;
|
|
regulator-max-microamp = <7000000>;
|
|
enable-gpios = <&gpio 17 0>;
|
|
};
|
|
};
|
|
};
|
|
|