threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
29 lines
955 B
Plaintext
29 lines
955 B
Plaintext
Davicom DM9000 Fast Ethernet controller
|
|
|
|
Required properties:
|
|
- compatible = "davicom,dm9000";
|
|
- reg : physical addresses and sizes of registers, must contain 2 entries:
|
|
first entry : address register,
|
|
second entry : data register.
|
|
- interrupt-parent : interrupt controller to which the device is connected
|
|
- interrupts : interrupt specifier specific to interrupt controller
|
|
|
|
Optional properties:
|
|
- davicom,no-eeprom : Configuration EEPROM is not available
|
|
- davicom,ext-phy : Use external PHY
|
|
- reset-gpios : phandle of gpio that will be used to reset chip during probe
|
|
- vcc-supply : phandle of regulator that will be used to enable power to chip
|
|
|
|
Example:
|
|
|
|
ethernet@18000000 {
|
|
compatible = "davicom,dm9000";
|
|
reg = <0x18000000 0x2 0x18000004 0x2>;
|
|
interrupt-parent = <&gpn>;
|
|
interrupts = <7 4>;
|
|
local-mac-address = [00 00 de ad be ef];
|
|
davicom,no-eeprom;
|
|
reset-gpios = <&gpf 12 GPIO_ACTIVE_LOW>;
|
|
vcc-supply = <ð0_power>;
|
|
};
|