threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
31 lines
903 B
Plaintext
31 lines
903 B
Plaintext
Maxim MAX30102 heart rate and pulse oximeter sensor
|
|
|
|
* https://datasheets.maximintegrated.com/en/ds/MAX30102.pdf
|
|
|
|
Required properties:
|
|
- compatible: must be "maxim,max30102"
|
|
- reg: the I2C address of the sensor
|
|
- interrupt-parent: should be the phandle for the interrupt controller
|
|
- interrupts: the sole interrupt generated by the device
|
|
|
|
Refer to interrupt-controller/interrupts.txt for generic
|
|
interrupt client node bindings.
|
|
|
|
Optional properties:
|
|
- maxim,red-led-current-microamp: configuration for RED LED current
|
|
- maxim,ir-led-current-microamp: configuration for IR LED current
|
|
|
|
Note that each step is approximately 200 microamps, ranging from 0 uA to
|
|
50800 uA.
|
|
|
|
Example:
|
|
|
|
max30100@57 {
|
|
compatible = "maxim,max30102";
|
|
reg = <0x57>;
|
|
maxim,red-led-current-microamp = <7000>;
|
|
maxim,ir-led-current-microamp = <7000>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <16 2>;
|
|
};
|