threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
25 lines
799 B
Plaintext
25 lines
799 B
Plaintext
* IBM/AMCC/APM GPIO Controller for PowerPC 4XX series and compatible SoCs
|
|
|
|
All GPIOs are pin-shared with other functions. DCRs control whether a
|
|
particular pin that has GPIO capabilities acts as a GPIO or is used for
|
|
another purpose. GPIO outputs are separately programmable to emulate
|
|
an open-drain driver.
|
|
|
|
Required properties:
|
|
- compatible: must be "ibm,ppc4xx-gpio"
|
|
- reg: address and length of the register set for the device
|
|
- #gpio-cells: must be set to 2. The first cell is the pin number
|
|
and the second cell is used to specify the gpio polarity:
|
|
0 = active high
|
|
1 = active low
|
|
- gpio-controller: marks the device node as a gpio controller.
|
|
|
|
Example:
|
|
|
|
GPIO0: gpio@ef600b00 {
|
|
compatible = "ibm,ppc4xx-gpio";
|
|
reg = <0xef600b00 0x00000048>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
};
|