Files
android/Documentation/devicetree/bindings/fpga/lattice-ice40-fpga-mgr.txt
T
threeeye bc1d038eac REVVL 6 Pro kernel bring-up: full working tree snapshot (2026-09-12)
Squashed backup commit (no shallow-clone history issues) of
xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream
commit 9eece662e) plus all fixes applied to get everpal_defconfig building
clean against a modern (GCC 15.2.0) toolchain -- see the previous commit
message on the lineage-23.2 branch (also in this repo history is not
available here since this is a squashed snapshot; full incremental history
lives in the local DL380 checkout and the upstream GitHub remote).

Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
2026-09-12 13:36:46 +00:00

22 lines
729 B
Plaintext

Lattice iCE40 FPGA Manager
Required properties:
- compatible: Should contain "lattice,ice40-fpga-mgr"
- reg: SPI chip select
- spi-max-frequency: Maximum SPI frequency (>=1000000, <=25000000)
- cdone-gpios: GPIO input connected to CDONE pin
- reset-gpios: Active-low GPIO output connected to CRESET_B pin. Note
that unless the GPIO is held low during startup, the
FPGA will enter Master SPI mode and drive SCK with a
clock signal potentially jamming other devices on the
bus until the firmware is loaded.
Example:
fpga: fpga@0 {
compatible = "lattice,ice40-fpga-mgr";
reg = <0>;
spi-max-frequency = <1000000>;
cdone-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
};