threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
84 lines
2.0 KiB
Plaintext
84 lines
2.0 KiB
Plaintext
* BCM2835 DMA controller
|
|
|
|
The BCM2835 DMA controller has 16 channels in total.
|
|
Only the lower 13 channels have an associated IRQ.
|
|
Some arbitrary channels are used by the firmware
|
|
(1,3,6,7 in the current firmware version).
|
|
The channels 0,2 and 3 have special functionality
|
|
and should not be used by the driver.
|
|
|
|
Required properties:
|
|
- compatible: Should be "brcm,bcm2835-dma".
|
|
- reg: Should contain DMA registers location and length.
|
|
- interrupts: Should contain the DMA interrupts associated
|
|
to the DMA channels in ascending order.
|
|
- interrupt-names: Should contain the names of the interrupt
|
|
in the form "dmaXX".
|
|
Use "dma-shared-all" for the common interrupt line
|
|
that is shared by all dma channels.
|
|
- #dma-cells: Must be <1>, the cell in the dmas property of the
|
|
client device represents the DREQ number.
|
|
- brcm,dma-channel-mask: Bit mask representing the channels
|
|
not used by the firmware in ascending order,
|
|
i.e. first channel corresponds to LSB.
|
|
|
|
Example:
|
|
|
|
dma: dma@7e007000 {
|
|
compatible = "brcm,bcm2835-dma";
|
|
reg = <0x7e007000 0xf00>;
|
|
interrupts = <1 16>,
|
|
<1 17>,
|
|
<1 18>,
|
|
<1 19>,
|
|
<1 20>,
|
|
<1 21>,
|
|
<1 22>,
|
|
<1 23>,
|
|
<1 24>,
|
|
<1 25>,
|
|
<1 26>,
|
|
/* dma channel 11-14 share one irq */
|
|
<1 27>,
|
|
<1 27>,
|
|
<1 27>,
|
|
<1 27>,
|
|
/* unused shared irq for all channels */
|
|
<1 28>;
|
|
interrupt-names = "dma0",
|
|
"dma1",
|
|
"dma2",
|
|
"dma3",
|
|
"dma4",
|
|
"dma5",
|
|
"dma6",
|
|
"dma7",
|
|
"dma8",
|
|
"dma9",
|
|
"dma10",
|
|
"dma11",
|
|
"dma12",
|
|
"dma13",
|
|
"dma14",
|
|
"dma-shared-all";
|
|
|
|
#dma-cells = <1>;
|
|
brcm,dma-channel-mask = <0x7f35>;
|
|
};
|
|
|
|
|
|
DMA clients connected to the BCM2835 DMA controller must use the format
|
|
described in the dma.txt file, using a two-cell specifier for each channel.
|
|
|
|
Example:
|
|
|
|
bcm2835_i2s: i2s@7e203000 {
|
|
compatible = "brcm,bcm2835-i2s";
|
|
reg = < 0x7e203000 0x20>,
|
|
< 0x7e101098 0x02>;
|
|
|
|
dmas = <&dma 2>,
|
|
<&dma 3>;
|
|
dma-names = "tx", "rx";
|
|
};
|