Files
android/Documentation/devicetree/bindings/clock/altr_socfpga.txt
T
threeeye bc1d038eac REVVL 6 Pro kernel bring-up: full working tree snapshot (2026-09-12)
Squashed backup commit (no shallow-clone history issues) of
xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream
commit 9eece662e) plus all fixes applied to get everpal_defconfig building
clean against a modern (GCC 15.2.0) toolchain -- see the previous commit
message on the lineage-23.2 branch (also in this repo history is not
available here since this is a squashed snapshot; full incremental history
lives in the local DL380 checkout and the upstream GitHub remote).

Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
2026-09-12 13:36:46 +00:00

31 lines
1.4 KiB
Plaintext

Device Tree Clock bindings for Altera's SoCFPGA platform
This binding uses the common clock binding[1].
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
Required properties:
- compatible : shall be one of the following:
"altr,socfpga-pll-clock" - for a PLL clock
"altr,socfpga-perip-clock" - The peripheral clock divided from the
PLL clock.
"altr,socfpga-gate-clk" - Clocks that directly feed peripherals and
can get gated.
- reg : shall be the control register offset from CLOCK_MANAGER's base for the clock.
- clocks : shall be the input parent clock phandle for the clock. This is
either an oscillator or a pll output.
- #clock-cells : from common clock binding, shall be set to 0.
Optional properties:
- fixed-divider : If clocks have a fixed divider value, use this property.
- clk-gate : For "socfpga-gate-clk", clk-gate contains the gating register
and the bit index.
- div-reg : For "socfpga-gate-clk" and "socfpga-periph-clock", div-reg contains
the divider register, bit shift, and width.
- clk-phase : For the sdmmc_clk, contains the value of the clock phase that controls
the SDMMC CIU clock. The first value is the clk_sample(smpsel), and the second
value is the cclk_in_drv(drvsel). The clk-phase is used to enable the correct
hold/delay times that is needed for the SD/MMC CIU clock. The values of both
can be 0-315 degrees, in 45 degree increments.