threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
33 lines
1.2 KiB
Plaintext
33 lines
1.2 KiB
Plaintext
Tegra124 SoC SATA AHCI controller
|
|
|
|
Required properties :
|
|
- compatible : For Tegra124, must contain "nvidia,tegra124-ahci". Otherwise,
|
|
must contain '"nvidia,<chip>-ahci", "nvidia,tegra124-ahci"', where <chip>
|
|
is tegra132.
|
|
- reg : Should contain 2 entries:
|
|
- AHCI register set (SATA BAR5)
|
|
- SATA register set
|
|
- interrupts : Defines the interrupt used by SATA
|
|
- clocks : Must contain an entry for each entry in clock-names.
|
|
See ../clocks/clock-bindings.txt for details.
|
|
- clock-names : Must include the following entries:
|
|
- sata
|
|
- sata-oob
|
|
- cml1
|
|
- pll_e
|
|
- resets : Must contain an entry for each entry in reset-names.
|
|
See ../reset/reset.txt for details.
|
|
- reset-names : Must include the following entries:
|
|
- sata
|
|
- sata-oob
|
|
- sata-cold
|
|
- phys : Must contain an entry for each entry in phy-names.
|
|
See ../phy/phy-bindings.txt for details.
|
|
- phy-names : Must include the following entries:
|
|
- sata-phy : XUSB PADCTL SATA PHY
|
|
- hvdd-supply : Defines the SATA HVDD regulator
|
|
- vddio-supply : Defines the SATA VDDIO regulator
|
|
- avdd-supply : Defines the SATA AVDD regulator
|
|
- target-5v-supply : Defines the SATA 5V power regulator
|
|
- target-12v-supply : Defines the SATA 12V power regulator
|