threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
70 lines
1.8 KiB
C
70 lines
1.8 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/*
|
|
* Definitions for the KLSI KL5KUSB105 serial port adapter
|
|
*/
|
|
|
|
/* vendor/product pairs that are known to contain this chipset */
|
|
#define PALMCONNECT_VID 0x0830
|
|
#define PALMCONNECT_PID 0x0080
|
|
|
|
#define KLSI_VID 0x05e9
|
|
#define KLSI_KL5KUSB105D_PID 0x00c0
|
|
|
|
/* Vendor commands: */
|
|
|
|
|
|
/* port table -- the chip supports up to 4 channels */
|
|
|
|
/* baud rates */
|
|
|
|
enum {
|
|
kl5kusb105a_sio_b115200 = 0,
|
|
kl5kusb105a_sio_b57600 = 1,
|
|
kl5kusb105a_sio_b38400 = 2,
|
|
kl5kusb105a_sio_b19200 = 4,
|
|
kl5kusb105a_sio_b14400 = 5,
|
|
kl5kusb105a_sio_b9600 = 6,
|
|
kl5kusb105a_sio_b4800 = 8, /* unchecked */
|
|
kl5kusb105a_sio_b2400 = 9, /* unchecked */
|
|
kl5kusb105a_sio_b1200 = 0xa, /* unchecked */
|
|
kl5kusb105a_sio_b600 = 0xb /* unchecked */
|
|
};
|
|
|
|
/* data bits */
|
|
#define kl5kusb105a_dtb_7 7
|
|
#define kl5kusb105a_dtb_8 8
|
|
|
|
|
|
|
|
/* requests: */
|
|
#define KL5KUSB105A_SIO_SET_DATA 1
|
|
#define KL5KUSB105A_SIO_POLL 2
|
|
#define KL5KUSB105A_SIO_CONFIGURE 3
|
|
/* values used for request KL5KUSB105A_SIO_CONFIGURE */
|
|
#define KL5KUSB105A_SIO_CONFIGURE_READ_ON 3
|
|
#define KL5KUSB105A_SIO_CONFIGURE_READ_OFF 2
|
|
|
|
/* Interpretation of modem status lines */
|
|
/* These need sorting out by individually connecting pins and checking
|
|
* results. FIXME!
|
|
* When data is being sent we see 0x30 in the lower byte; this must
|
|
* contain DSR and CTS ...
|
|
*/
|
|
#define KL5KUSB105A_DSR ((1<<4) | (1<<5))
|
|
#define KL5KUSB105A_CTS ((1<<5) | (1<<4))
|
|
|
|
#define KL5KUSB105A_WANTS_TO_SEND 0x30
|
|
#if 0
|
|
#define KL5KUSB105A_DTR /* Data Terminal Ready */
|
|
#define KL5KUSB105A_CTS /* Clear To Send */
|
|
#define KL5KUSB105A_CD /* Carrier Detect */
|
|
#define KL5KUSB105A_DSR /* Data Set Ready */
|
|
#define KL5KUSB105A_RxD /* Receive pin */
|
|
|
|
#define KL5KUSB105A_LE
|
|
#define KL5KUSB105A_RTS
|
|
#define KL5KUSB105A_ST
|
|
#define KL5KUSB105A_SR
|
|
#define KL5KUSB105A_RI /* Ring Indicator */
|
|
#endif
|