threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
159 lines
3.6 KiB
C
159 lines
3.6 KiB
C
/*
|
|
* Copyright (c) 2006-2008 Simtec Electronics
|
|
* http://armlinux.simtec.co.uk/
|
|
* Ben Dooks <ben@simtec.co.uk>
|
|
*
|
|
* S3C2410 CPU Frequency scaling
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/cpufreq.h>
|
|
#include <linux/device.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
#include <mach/regs-clock.h>
|
|
|
|
#include <plat/cpu.h>
|
|
#include <plat/cpu-freq-core.h>
|
|
|
|
/* Note, 2410A has an extra mode for 1:4:4 ratio, bit 2 of CLKDIV */
|
|
|
|
static void s3c2410_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
|
|
{
|
|
u32 clkdiv = 0;
|
|
|
|
if (cfg->divs.h_divisor == 2)
|
|
clkdiv |= S3C2410_CLKDIVN_HDIVN;
|
|
|
|
if (cfg->divs.p_divisor != cfg->divs.h_divisor)
|
|
clkdiv |= S3C2410_CLKDIVN_PDIVN;
|
|
|
|
__raw_writel(clkdiv, S3C2410_CLKDIVN);
|
|
}
|
|
|
|
static int s3c2410_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
|
|
{
|
|
unsigned long hclk, fclk, pclk;
|
|
unsigned int hdiv, pdiv;
|
|
unsigned long hclk_max;
|
|
|
|
fclk = cfg->freq.fclk;
|
|
hclk_max = cfg->max.hclk;
|
|
|
|
cfg->freq.armclk = fclk;
|
|
|
|
s3c_freq_dbg("%s: fclk is %lu, max hclk %lu\n",
|
|
__func__, fclk, hclk_max);
|
|
|
|
hdiv = (fclk > cfg->max.hclk) ? 2 : 1;
|
|
hclk = fclk / hdiv;
|
|
|
|
if (hclk > cfg->max.hclk) {
|
|
s3c_freq_dbg("%s: hclk too big\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
|
|
pclk = hclk / pdiv;
|
|
|
|
if (pclk > cfg->max.pclk) {
|
|
s3c_freq_dbg("%s: pclk too big\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
pdiv *= hdiv;
|
|
|
|
/* record the result */
|
|
cfg->divs.p_divisor = pdiv;
|
|
cfg->divs.h_divisor = hdiv;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct s3c_cpufreq_info s3c2410_cpufreq_info = {
|
|
.max = {
|
|
.fclk = 200000000,
|
|
.hclk = 100000000,
|
|
.pclk = 50000000,
|
|
},
|
|
|
|
/* transition latency is about 5ms worst-case, so
|
|
* set 10ms to be sure */
|
|
.latency = 10000000,
|
|
|
|
.locktime_m = 150,
|
|
.locktime_u = 150,
|
|
.locktime_bits = 12,
|
|
|
|
.need_pll = 1,
|
|
|
|
.name = "s3c2410",
|
|
.calc_iotiming = s3c2410_iotiming_calc,
|
|
.set_iotiming = s3c2410_iotiming_set,
|
|
.get_iotiming = s3c2410_iotiming_get,
|
|
|
|
.set_fvco = s3c2410_set_fvco,
|
|
.set_refresh = s3c2410_cpufreq_setrefresh,
|
|
.set_divs = s3c2410_cpufreq_setdivs,
|
|
.calc_divs = s3c2410_cpufreq_calcdivs,
|
|
|
|
.debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
|
|
};
|
|
|
|
static int s3c2410_cpufreq_add(struct device *dev,
|
|
struct subsys_interface *sif)
|
|
{
|
|
return s3c_cpufreq_register(&s3c2410_cpufreq_info);
|
|
}
|
|
|
|
static struct subsys_interface s3c2410_cpufreq_interface = {
|
|
.name = "s3c2410_cpufreq",
|
|
.subsys = &s3c2410_subsys,
|
|
.add_dev = s3c2410_cpufreq_add,
|
|
};
|
|
|
|
static int __init s3c2410_cpufreq_init(void)
|
|
{
|
|
return subsys_interface_register(&s3c2410_cpufreq_interface);
|
|
}
|
|
arch_initcall(s3c2410_cpufreq_init);
|
|
|
|
static int s3c2410a_cpufreq_add(struct device *dev,
|
|
struct subsys_interface *sif)
|
|
{
|
|
/* alter the maximum freq settings for S3C2410A. If a board knows
|
|
* it only has a maximum of 200, then it should register its own
|
|
* limits. */
|
|
|
|
s3c2410_cpufreq_info.max.fclk = 266000000;
|
|
s3c2410_cpufreq_info.max.hclk = 133000000;
|
|
s3c2410_cpufreq_info.max.pclk = 66500000;
|
|
s3c2410_cpufreq_info.name = "s3c2410a";
|
|
|
|
return s3c2410_cpufreq_add(dev, sif);
|
|
}
|
|
|
|
static struct subsys_interface s3c2410a_cpufreq_interface = {
|
|
.name = "s3c2410a_cpufreq",
|
|
.subsys = &s3c2410a_subsys,
|
|
.add_dev = s3c2410a_cpufreq_add,
|
|
};
|
|
|
|
static int __init s3c2410a_cpufreq_init(void)
|
|
{
|
|
return subsys_interface_register(&s3c2410a_cpufreq_interface);
|
|
}
|
|
arch_initcall(s3c2410a_cpufreq_init);
|