threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
169 lines
3.6 KiB
Plaintext
169 lines
3.6 KiB
Plaintext
# SPDX-License-Identifier: GPL-2.0
|
|
config SIBYTE_SB1250
|
|
bool
|
|
select CEVT_SB1250
|
|
select CSRC_SB1250
|
|
select HW_HAS_PCI
|
|
select IRQ_MIPS_CPU
|
|
select SIBYTE_ENABLE_LDT_IF_PCI
|
|
select SIBYTE_HAS_ZBUS_PROFILING
|
|
select SIBYTE_SB1xxx_SOC
|
|
select SYS_SUPPORTS_SMP
|
|
|
|
config SIBYTE_BCM1120
|
|
bool
|
|
select CEVT_SB1250
|
|
select CSRC_SB1250
|
|
select IRQ_MIPS_CPU
|
|
select SIBYTE_BCM112X
|
|
select SIBYTE_HAS_ZBUS_PROFILING
|
|
select SIBYTE_SB1xxx_SOC
|
|
|
|
config SIBYTE_BCM1125
|
|
bool
|
|
select CEVT_SB1250
|
|
select CSRC_SB1250
|
|
select HW_HAS_PCI
|
|
select IRQ_MIPS_CPU
|
|
select SIBYTE_BCM112X
|
|
select SIBYTE_HAS_ZBUS_PROFILING
|
|
select SIBYTE_SB1xxx_SOC
|
|
|
|
config SIBYTE_BCM1125H
|
|
bool
|
|
select CEVT_SB1250
|
|
select CSRC_SB1250
|
|
select HW_HAS_PCI
|
|
select IRQ_MIPS_CPU
|
|
select SIBYTE_BCM112X
|
|
select SIBYTE_ENABLE_LDT_IF_PCI
|
|
select SIBYTE_HAS_ZBUS_PROFILING
|
|
select SIBYTE_SB1xxx_SOC
|
|
|
|
config SIBYTE_BCM112X
|
|
bool
|
|
select CEVT_SB1250
|
|
select CSRC_SB1250
|
|
select IRQ_MIPS_CPU
|
|
select SIBYTE_SB1xxx_SOC
|
|
select SIBYTE_HAS_ZBUS_PROFILING
|
|
|
|
config SIBYTE_BCM1x80
|
|
bool
|
|
select CEVT_BCM1480
|
|
select CSRC_BCM1480
|
|
select HW_HAS_PCI
|
|
select IRQ_MIPS_CPU
|
|
select SIBYTE_HAS_ZBUS_PROFILING
|
|
select SIBYTE_SB1xxx_SOC
|
|
select SYS_SUPPORTS_SMP
|
|
|
|
config SIBYTE_BCM1x55
|
|
bool
|
|
select CEVT_BCM1480
|
|
select CSRC_BCM1480
|
|
select HW_HAS_PCI
|
|
select IRQ_MIPS_CPU
|
|
select SIBYTE_SB1xxx_SOC
|
|
select SIBYTE_HAS_ZBUS_PROFILING
|
|
select SYS_SUPPORTS_SMP
|
|
|
|
config SIBYTE_SB1xxx_SOC
|
|
bool
|
|
select DMA_COHERENT
|
|
select IRQ_MIPS_CPU
|
|
select SWAP_IO_SPACE
|
|
select SYS_SUPPORTS_32BIT_KERNEL
|
|
select SYS_SUPPORTS_64BIT_KERNEL
|
|
select FW_CFE
|
|
select SYS_HAS_EARLY_PRINTK
|
|
|
|
choice
|
|
prompt "SiByte SOC Stepping"
|
|
depends on SIBYTE_SB1xxx_SOC
|
|
|
|
config CPU_SB1_PASS_2_1250
|
|
bool "1250 An"
|
|
depends on SIBYTE_SB1250
|
|
select CPU_SB1_PASS_2
|
|
help
|
|
Also called BCM1250 Pass 2
|
|
|
|
config CPU_SB1_PASS_2_2
|
|
bool "1250 Bn"
|
|
depends on SIBYTE_SB1250
|
|
select CPU_HAS_PREFETCH
|
|
help
|
|
Also called BCM1250 Pass 2.2
|
|
|
|
config CPU_SB1_PASS_4
|
|
bool "1250 Cn"
|
|
depends on SIBYTE_SB1250
|
|
select CPU_HAS_PREFETCH
|
|
help
|
|
Also called BCM1250 Pass 3
|
|
|
|
config CPU_SB1_PASS_2_112x
|
|
bool "112x Hybrid"
|
|
depends on SIBYTE_BCM112X
|
|
select CPU_SB1_PASS_2
|
|
|
|
config CPU_SB1_PASS_3
|
|
bool "112x An"
|
|
depends on SIBYTE_BCM112X
|
|
select CPU_HAS_PREFETCH
|
|
|
|
endchoice
|
|
|
|
config CPU_SB1_PASS_2
|
|
bool
|
|
|
|
config SIBYTE_HAS_LDT
|
|
bool
|
|
|
|
config SIBYTE_ENABLE_LDT_IF_PCI
|
|
bool
|
|
select SIBYTE_HAS_LDT if PCI
|
|
|
|
config SB1_CEX_ALWAYS_FATAL
|
|
bool "All cache exceptions considered fatal (no recovery attempted)"
|
|
depends on SIBYTE_SB1xxx_SOC
|
|
|
|
config SB1_CERR_STALL
|
|
bool "Stall (rather than panic) on fatal cache error"
|
|
depends on SIBYTE_SB1xxx_SOC
|
|
|
|
config SIBYTE_CFE_CONSOLE
|
|
bool "Use firmware console"
|
|
depends on SIBYTE_SB1xxx_SOC
|
|
help
|
|
Use the CFE API's console write routines during boot. Other console
|
|
options (VT console, sb1250 duart console, etc.) should not be
|
|
configured.
|
|
|
|
config SIBYTE_BUS_WATCHER
|
|
bool "Support for Bus Watcher statistics"
|
|
depends on SIBYTE_SB1xxx_SOC && \
|
|
(SIBYTE_BCM112X || SIBYTE_SB1250 || \
|
|
SIBYTE_BCM1x55 || SIBYTE_BCM1x80)
|
|
help
|
|
Handle and keep statistics on the bus error interrupts (COR_ECC,
|
|
BAD_ECC, IO_BUS).
|
|
|
|
config SIBYTE_BW_TRACE
|
|
bool "Capture bus trace before bus error"
|
|
depends on SIBYTE_BUS_WATCHER
|
|
help
|
|
Run a continuous bus trace, dumping the raw data as soon as
|
|
a ZBbus error is detected. Cannot work if ZBbus profiling
|
|
is turned on, and also will interfere with JTAG-based trace
|
|
buffer activity. Raw buffer data is dumped to console, and
|
|
must be processed off-line.
|
|
|
|
config SIBYTE_TBPROF
|
|
tristate "Support for ZBbus profiling"
|
|
depends on SIBYTE_HAS_ZBUS_PROFILING
|
|
|
|
config SIBYTE_HAS_ZBUS_PROFILING
|
|
bool
|