threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
31 lines
1.0 KiB
Plaintext
31 lines
1.0 KiB
Plaintext
modprobe sound
|
|
insmod ad1848
|
|
insmod gus io=* irq=* dma=* ...
|
|
|
|
This loads the driver for the Gravis Ultrasound family of sound cards.
|
|
|
|
The gus module takes the following arguments
|
|
|
|
io I/O address of the Ultrasound card (eg. io=0x220)
|
|
irq IRQ of the Sound Blaster card
|
|
dma DMA channel for the Sound Blaster
|
|
dma16 2nd DMA channel, only needed for full duplex operation
|
|
type 1 for PnP card
|
|
gus16 1 for using 16 bit sampling daughter board
|
|
no_wave_dma Set to disable DMA usage for wavetable (see note)
|
|
db16 ???
|
|
|
|
|
|
no_wave_dma option
|
|
|
|
This option defaults to a value of 0, which allows the Ultrasound wavetable
|
|
DSP to use DMA for playback and downloading samples. This is the same
|
|
as the old behaviour. If set to 1, no DMA is needed for downloading samples,
|
|
and allows owners of a GUS MAX to make use of simultaneous digital audio
|
|
(/dev/dsp), MIDI, and wavetable playback.
|
|
|
|
|
|
If you have problems in recording with GUS MAX, you could try to use
|
|
just one 8 bit DMA channel. Recording will not work with one DMA
|
|
channel if it's a 16 bit one.
|