threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
29 lines
979 B
Plaintext
29 lines
979 B
Plaintext
Kernel driver abx500
|
|
====================
|
|
|
|
Supported chips:
|
|
* ST-Ericsson ABx500 series
|
|
Prefix: 'abx500'
|
|
Addresses scanned: -
|
|
Datasheet: http://www.stericsson.com/developers/documentation.jsp
|
|
|
|
Authors:
|
|
Martin Persson <martin.persson@stericsson.com>
|
|
Hongbo Zhang <hongbo.zhang@linaro.org>
|
|
|
|
Description
|
|
-----------
|
|
|
|
Every ST-Ericsson Ux500 SOC consists of both ABx500 and DBx500 physically,
|
|
this is kernel hwmon driver for ABx500.
|
|
|
|
There are some GPADCs inside ABx500 which are designed for connecting to
|
|
thermal sensors, and there is also a thermal sensor inside ABx500 too, which
|
|
raises interrupt when critical temperature reached.
|
|
|
|
This abx500 is a common layer which can monitor all of the sensors, every
|
|
specific abx500 chip has its special configurations in its own file, e.g. some
|
|
sensors can be configured invisible if they are not available on that chip, and
|
|
the corresponding gpadc_addr should be set to 0, thus this sensor won't be
|
|
polled.
|