threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
33 lines
909 B
Plaintext
33 lines
909 B
Plaintext
Xilinx SuperSpeed DWC3 USB SoC controller
|
|
|
|
Required properties:
|
|
- compatible: Should contain "xlnx,zynqmp-dwc3"
|
|
- clocks: A list of phandles for the clocks listed in clock-names
|
|
- clock-names: Should contain the following:
|
|
"bus_clk" Master/Core clock, have to be >= 125 MHz for SS
|
|
operation and >= 60MHz for HS operation
|
|
|
|
"ref_clk" Clock source to core during PHY power down
|
|
|
|
Required child node:
|
|
A child node must exist to represent the core DWC3 IP block. The name of
|
|
the node is not important. The content of the node is defined in dwc3.txt.
|
|
|
|
Example device node:
|
|
|
|
usb@0 {
|
|
#address-cells = <0x2>;
|
|
#size-cells = <0x1>;
|
|
compatible = "xlnx,zynqmp-dwc3";
|
|
clock-names = "bus_clk" "ref_clk";
|
|
clocks = <&clk125>, <&clk125>;
|
|
ranges;
|
|
|
|
dwc3@fe200000 {
|
|
compatible = "snps,dwc3";
|
|
reg = <0x0 0xfe200000 0x40000>;
|
|
interrupts = <0x0 0x41 0x4>;
|
|
dr_mode = "host";
|
|
};
|
|
};
|