threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
30 lines
974 B
Plaintext
30 lines
974 B
Plaintext
* Device tree bindings for Texas instruments Keystone timer
|
|
|
|
This document provides bindings for the 64-bit timer in the KeyStone
|
|
architecture devices. The timer can be configured as a general-purpose 64-bit
|
|
timer, dual general-purpose 32-bit timers. When configured as dual 32-bit
|
|
timers, each half can operate in conjunction (chain mode) or independently
|
|
(unchained mode) of each other.
|
|
|
|
It is global timer is a free running up-counter and can generate interrupt
|
|
when the counter reaches preset counter values.
|
|
|
|
Documentation:
|
|
http://www.ti.com/lit/ug/sprugv5a/sprugv5a.pdf
|
|
|
|
Required properties:
|
|
|
|
- compatible : should be "ti,keystone-timer".
|
|
- reg : specifies base physical address and count of the registers.
|
|
- interrupts : interrupt generated by the timer.
|
|
- clocks : the clock feeding the timer clock.
|
|
|
|
Example:
|
|
|
|
timer@22f0000 {
|
|
compatible = "ti,keystone-timer";
|
|
reg = <0x022f0000 0x80>;
|
|
interrupts = <GIC_SPI 110 IRQ_TYPE_EDGE_RISING>;
|
|
clocks = <&clktimer15>;
|
|
};
|