threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
43 lines
1.4 KiB
Plaintext
43 lines
1.4 KiB
Plaintext
* Hisilicon 6210 i2s controller
|
|
|
|
Required properties:
|
|
|
|
- compatible: should be one of the following:
|
|
- "hisilicon,hi6210-i2s"
|
|
- reg: physical base address of the i2s controller unit and length of
|
|
memory mapped region.
|
|
- interrupts: should contain the i2s interrupt.
|
|
- clocks: a list of phandle + clock-specifier pairs, one for each entry
|
|
in clock-names.
|
|
- clock-names: should contain following:
|
|
- "dacodec"
|
|
- "i2s-base"
|
|
- dmas: DMA specifiers for tx dma. See the DMA client binding,
|
|
Documentation/devicetree/bindings/dma/dma.txt
|
|
- dma-names: should be "tx" and "rx"
|
|
- hisilicon,sysctrl-syscon: phandle to sysctrl syscon
|
|
- #sound-dai-cells: Should be set to 1 (for multi-dai)
|
|
- The dai cell indexes reference the following interfaces:
|
|
0: S2 interface
|
|
(Currently that is the only one available, but more may be
|
|
supported in the future)
|
|
|
|
Example for the hi6210 i2s controller:
|
|
|
|
i2s0: i2s@f7118000{
|
|
compatible = "hisilicon,hi6210-i2s";
|
|
reg = <0x0 0xf7118000 0x0 0x8000>; /* i2s unit */
|
|
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; /* 155 "DigACodec_intr"-32 */
|
|
clocks = <&sys_ctrl HI6220_DACODEC_PCLK>,
|
|
<&sys_ctrl HI6220_BBPPLL0_DIV>;
|
|
clock-names = "dacodec", "i2s-base";
|
|
dmas = <&dma0 15 &dma0 14>;
|
|
dma-names = "rx", "tx";
|
|
hisilicon,sysctrl-syscon = <&sys_ctrl>;
|
|
#sound-dai-cells = <1>;
|
|
};
|
|
|
|
Then when referencing the i2s controller:
|
|
sound-dai = <&i2s0 0>; /* index 0 => S2 interface */
|
|
|