threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
37 lines
1.2 KiB
Plaintext
37 lines
1.2 KiB
Plaintext
NVIDIA Tegra20/Tegra30 high speed (DMA based) UART controller driver.
|
|
|
|
Required properties:
|
|
- compatible : should be "nvidia,tegra30-hsuart", "nvidia,tegra20-hsuart".
|
|
- reg: Should contain UART controller registers location and length.
|
|
- interrupts: Should contain UART controller interrupts.
|
|
- clocks: Must contain one entry, for the module clock.
|
|
See ../clocks/clock-bindings.txt for details.
|
|
- resets : Must contain an entry for each entry in reset-names.
|
|
See ../reset/reset.txt for details.
|
|
- reset-names : Must include the following entries:
|
|
- serial
|
|
- dmas : Must contain an entry for each entry in dma-names.
|
|
See ../dma/dma.txt for details.
|
|
- dma-names : Must include the following entries:
|
|
- rx
|
|
- tx
|
|
|
|
Optional properties:
|
|
- nvidia,enable-modem-interrupt: Enable modem interrupts. Should be enable
|
|
only if all 8 lines of UART controller are pinmuxed.
|
|
|
|
Example:
|
|
|
|
serial@70006000 {
|
|
compatible = "nvidia,tegra30-hsuart", "nvidia,tegra20-hsuart";
|
|
reg = <0x70006000 0x40>;
|
|
reg-shift = <2>;
|
|
interrupts = <0 36 0x04>;
|
|
nvidia,enable-modem-interrupt;
|
|
clocks = <&tegra_car 6>;
|
|
resets = <&tegra_car 6>;
|
|
reset-names = "serial";
|
|
dmas = <&apbdma 8>, <&apbdma 8>;
|
|
dma-names = "rx", "tx";
|
|
};
|