threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
39 lines
1.1 KiB
Plaintext
39 lines
1.1 KiB
Plaintext
Marvell 88PM800 regulator
|
|
|
|
Required properties:
|
|
- compatible: "marvell,88pm800"
|
|
- reg: I2C slave address
|
|
- regulators: A node that houses a sub-node for each regulator within the
|
|
device. Each sub-node is identified using the node's name (or the deprecated
|
|
regulator-compatible property if present), with valid values listed below.
|
|
The content of each sub-node is defined by the standard binding for
|
|
regulators; see regulator.txt.
|
|
|
|
The valid names for regulators are:
|
|
|
|
buck1, buck2, buck3, buck4, buck5, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7,
|
|
ldo8, ldo9, ldo10, ldo11, ldo12, ldo13, ldo14, ldo15, ldo16, ldo17, ldo18, ldo19
|
|
|
|
Example:
|
|
|
|
pmic: 88pm800@31 {
|
|
compatible = "marvell,88pm800";
|
|
reg = <0x31>;
|
|
|
|
regulators {
|
|
buck1 {
|
|
regulator-min-microvolt = <600000>;
|
|
regulator-max-microvolt = <3950000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
ldo1 {
|
|
regulator-min-microvolt = <600000>;
|
|
regulator-max-microvolt = <15000000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
...
|
|
};
|
|
};
|