threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
68 lines
2.0 KiB
Plaintext
68 lines
2.0 KiB
Plaintext
* Device tree bindings for Texas Instruments keystone reset
|
|
|
|
This node is intended to allow SoC reset in case of software reset
|
|
of selected watchdogs.
|
|
|
|
The Keystone SoCs can contain up to 4 watchdog timers to reset
|
|
SoC. Each watchdog timer event input is connected to the Reset Mux
|
|
block. The Reset Mux block can be configured to cause reset or not.
|
|
|
|
Additionally soft or hard reset can be configured.
|
|
|
|
Required properties:
|
|
|
|
- compatible: ti,keystone-reset
|
|
|
|
- ti,syscon-pll: phandle/offset pair. The phandle to syscon used to
|
|
access pll controller registers and the offset to use
|
|
reset control registers.
|
|
|
|
- ti,syscon-dev: phandle/offset pair. The phandle to syscon used to
|
|
access device state control registers and the offset
|
|
in order to use mux block registers for all watchdogs.
|
|
|
|
Optional properties:
|
|
|
|
- ti,soft-reset: Boolean option indicating soft reset.
|
|
By default hard reset is used.
|
|
|
|
- ti,wdt-list: WDT list that can cause SoC reset. It's not related
|
|
to WDT driver, it's just needed to enable a SoC related
|
|
reset that's triggered by one of WDTs. The list is
|
|
in format: <0>, <2>; It can be in random order and
|
|
begins from 0 to 3, as keystone can contain up to 4 SoC
|
|
reset watchdogs and can be in random order.
|
|
|
|
Example 1:
|
|
Setup keystone reset so that in case software reset or
|
|
WDT0 is triggered it issues hard reset for SoC.
|
|
|
|
pllctrl: pll-controller@02310000 {
|
|
compatible = "ti,keystone-pllctrl", "syscon";
|
|
reg = <0x02310000 0x200>;
|
|
};
|
|
|
|
devctrl: device-state-control@02620000 {
|
|
compatible = "ti,keystone-devctrl", "syscon";
|
|
reg = <0x02620000 0x1000>;
|
|
};
|
|
|
|
rstctrl: reset-controller {
|
|
compatible = "ti,keystone-reset";
|
|
ti,syscon-pll = <&pllctrl 0xe4>;
|
|
ti,syscon-dev = <&devctrl 0x328>;
|
|
ti,wdt-list = <0>;
|
|
};
|
|
|
|
Example 2:
|
|
Setup keystone reset so that in case of software reset or
|
|
WDT0 or WDT2 is triggered it issues soft reset for SoC.
|
|
|
|
rstctrl: reset-controller {
|
|
compatible = "ti,keystone-reset";
|
|
ti,syscon-pll = <&pllctrl 0xe4>;
|
|
ti,syscon-dev = <&devctrl 0x328>;
|
|
ti,wdt-list = <0>, <2>;
|
|
ti,soft-reset;
|
|
};
|