Files
threeeye bc1d038eac REVVL 6 Pro kernel bring-up: full working tree snapshot (2026-09-12)
Squashed backup commit (no shallow-clone history issues) of
xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream
commit 9eece662e) plus all fixes applied to get everpal_defconfig building
clean against a modern (GCC 15.2.0) toolchain -- see the previous commit
message on the lineage-23.2 branch (also in this repo history is not
available here since this is a squashed snapshot; full incremental history
lives in the local DL380 checkout and the upstream GitHub remote).

Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
2026-09-12 13:36:46 +00:00

56 lines
1.3 KiB
Plaintext

* Pin configuration for TI DA850/OMAP-L138/AM18x
These SoCs have a separate controller for setting bias (internal pullup/down).
Bias can only be selected for groups rather than individual pins.
Required Properties:
- compatible: Must be "ti,da850-pupd"
- reg: Base address and length of the memory resource used by the pullup/down
controller hardware module.
The controller node also acts as a container for pin group configuration nodes.
The names of these groups are ignored.
Pin Group Node Properties:
- groups: An array of strings, each string containing the name of a pin group.
Valid names are "cp0".."cp31".
The pin configuration parameters use the generic pinconf bindings defined in
pinctrl-bindings.txt in this directory. The supported parameters are
bias-disable, bias-pull-up, bias-pull-down.
Example
-------
In common dtsi file:
pinconf: pin-controller@22c00c {
compatible = "ti,da850-pupd";
reg = <0x22c00c 0x8>;
};
In board-specific file:
&pinconf {
pinctrl-0 = <&pinconf_bias_groups>;
pinctrl-names = "default";
pinconf_bias_groups: bias-groups {
pull-up {
groups = "cp30", "cp31";
bias-pull-up;
};
pull-down {
groups = "cp29", "cp28";
bias-pull-down;
};
disable {
groups = "cp27", "cp26";
bias-disable;
};
};
};