threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
29 lines
934 B
Plaintext
29 lines
934 B
Plaintext
* CA8210 IEEE 802.15.4 *
|
|
|
|
Required properties:
|
|
- compatible: Should be "cascoda,ca8210"
|
|
- reg: Controlling chip select
|
|
- spi-max-frequency: Maximum clock speed, should be *less than*
|
|
4000000
|
|
- spi-cpol: Requires inverted clock polarity
|
|
- reset-gpio: GPIO attached to reset
|
|
- irq-gpio: GPIO attached to IRQ
|
|
Optional properties:
|
|
- extclock-enable: Include for the ca8210 to route its 16MHz clock
|
|
to an output
|
|
- extclock-freq: Frequency in Hz of the external clock
|
|
- extclock-gpio: GPIO of the ca8210 to output the clock on
|
|
|
|
Example:
|
|
ca8210@0 {
|
|
compatible = "cascoda,ca8210";
|
|
reg = <0>;
|
|
spi-max-frequency = <3000000>;
|
|
spi-cpol;
|
|
reset-gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
|
|
irq-gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
|
|
extclock-enable;
|
|
extclock-freq = 16000000;
|
|
extclock-gpio = 2;
|
|
};
|