threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
36 lines
997 B
Plaintext
36 lines
997 B
Plaintext
Broadcom IPROC SDHCI controller
|
|
|
|
This file documents differences between the core properties described
|
|
by mmc.txt and the properties that represent the IPROC SDHCI controller.
|
|
|
|
Required properties:
|
|
- compatible : Should be one of the following
|
|
"brcm,bcm2835-sdhci"
|
|
"brcm,sdhci-iproc-cygnus"
|
|
"brcm,sdhci-iproc"
|
|
|
|
Use brcm2835-sdhci for Rasperry PI.
|
|
|
|
Use sdhci-iproc-cygnus for Broadcom SDHCI Controllers
|
|
restricted to 32bit host accesses to SDHCI registers.
|
|
|
|
Use sdhci-iproc for Broadcom SDHCI Controllers that allow standard
|
|
8, 16, 32-bit host access to SDHCI register.
|
|
|
|
- clocks : The clock feeding the SDHCI controller.
|
|
|
|
Optional properties:
|
|
- sdhci,auto-cmd12: specifies that controller should use auto CMD12.
|
|
|
|
Example:
|
|
|
|
sdhci0: sdhci@0x18041000 {
|
|
compatible = "brcm,sdhci-iproc-cygnus";
|
|
reg = <0x18041000 0x100>;
|
|
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&lcpll0_clks BCM_CYGNUS_LCPLL0_SDIO_CLK>;
|
|
bus-width = <4>;
|
|
sdhci,auto-cmd12;
|
|
no-1-8-v;
|
|
};
|