threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
28 lines
911 B
Plaintext
28 lines
911 B
Plaintext
STMicroelectronics STIH4xx HDMI CEC driver
|
|
|
|
Required properties:
|
|
- compatible : value should be "st,stih-cec"
|
|
- reg : Physical base address of the IP registers and length of memory
|
|
mapped region.
|
|
- clocks : from common clock binding: handle to HDMI CEC clock
|
|
- interrupts : HDMI CEC interrupt number to the CPU.
|
|
- pinctrl-names: Contains only one value - "default"
|
|
- pinctrl-0: Specifies the pin control groups used for CEC hardware.
|
|
- resets: Reference to a reset controller
|
|
- hdmi-phandle: Phandle to the HDMI controller, see also cec.txt.
|
|
|
|
Example for STIH407:
|
|
|
|
sti-cec@094a087c {
|
|
compatible = "st,stih-cec";
|
|
reg = <0x94a087c 0x64>;
|
|
clocks = <&clk_sysin>;
|
|
clock-names = "cec-clk";
|
|
interrupts = <GIC_SPI 140 IRQ_TYPE_NONE>;
|
|
interrupt-names = "cec-irq";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_cec0_default>;
|
|
resets = <&softreset STIH407_LPM_SOFTRESET>;
|
|
hdmi-phandle = <&hdmi>;
|
|
};
|