Files
threeeye bc1d038eac REVVL 6 Pro kernel bring-up: full working tree snapshot (2026-09-12)
Squashed backup commit (no shallow-clone history issues) of
xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream
commit 9eece662e) plus all fixes applied to get everpal_defconfig building
clean against a modern (GCC 15.2.0) toolchain -- see the previous commit
message on the lineage-23.2 branch (also in this repo history is not
available here since this is a squashed snapshot; full incremental history
lives in the local DL380 checkout and the upstream GitHub remote).

Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
2026-09-12 13:36:46 +00:00

42 lines
1.3 KiB
Plaintext

* Aptina 1/3-Inch WVGA CMOS Digital Image Sensor
The Aptina MT9V032 is a 1/3-inch CMOS active pixel digital image sensor with
an active array size of 752H x 480V. It is programmable through a simple
two-wire serial interface.
Required Properties:
- compatible: value should be either one among the following
(a) "aptina,mt9v022" for MT9V022 color sensor
(b) "aptina,mt9v022m" for MT9V022 monochrome sensor
(c) "aptina,mt9v024" for MT9V024 color sensor
(d) "aptina,mt9v024m" for MT9V024 monochrome sensor
(e) "aptina,mt9v032" for MT9V032 color sensor
(f) "aptina,mt9v032m" for MT9V032 monochrome sensor
(g) "aptina,mt9v034" for MT9V034 color sensor
(h) "aptina,mt9v034m" for MT9V034 monochrome sensor
Optional Properties:
- link-frequencies: List of allowed link frequencies in Hz. Each frequency is
expressed as a 64-bit big-endian integer.
- reset-gpios: GPIO handle which is connected to the reset pin of the chip.
- standby-gpios: GPIO handle which is connected to the standby pin of the chip.
For further reading on port node refer to
Documentation/devicetree/bindings/media/video-interfaces.txt.
Example:
mt9v032@5c {
compatible = "aptina,mt9v032";
reg = <0x5c>;
port {
mt9v032_out: endpoint {
link-frequencies = /bits/ 64
<13000000 26600000 27000000>;
};
};
};