Files
threeeye bc1d038eac REVVL 6 Pro kernel bring-up: full working tree snapshot (2026-09-12)
Squashed backup commit (no shallow-clone history issues) of
xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream
commit 9eece662e) plus all fixes applied to get everpal_defconfig building
clean against a modern (GCC 15.2.0) toolchain -- see the previous commit
message on the lineage-23.2 branch (also in this repo history is not
available here since this is a squashed snapshot; full incremental history
lives in the local DL380 checkout and the upstream GitHub remote).

Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
2026-09-12 13:36:46 +00:00

50 lines
1.3 KiB
Plaintext

*NXP - pca9532 PWM LED Driver
The PCA9532 family is SMBus I/O expander optimized for dimming LEDs.
The PWM support 256 steps.
Required properties:
- compatible:
"nxp,pca9530"
"nxp,pca9531"
"nxp,pca9532"
"nxp,pca9533"
- reg - I2C slave address
Each led is represented as a sub-node of the nxp,pca9530.
Optional sub-node properties:
- label: see Documentation/devicetree/bindings/leds/common.txt
- type: Output configuration, see dt-bindings/leds/leds-pca9532.h (default NONE)
- linux,default-trigger: see Documentation/devicetree/bindings/leds/common.txt
- default-state: see Documentation/devicetree/bindings/leds/common.txt
This property is only valid for sub-nodes of type <PCA9532_TYPE_LED>.
Example:
#include <dt-bindings/leds/leds-pca9532.h>
leds: pca9530@60 {
compatible = "nxp,pca9530";
reg = <0x60>;
red-power {
label = "pca:red:power";
type = <PCA9532_TYPE_LED>;
};
green-power {
label = "pca:green:power";
type = <PCA9532_TYPE_LED>;
};
kernel-booting {
type = <PCA9532_TYPE_LED>;
default-state = "on";
};
sys-stat {
type = <PCA9532_TYPE_LED>;
default-state = "keep"; // don't touch, was set by U-Boot
};
};
For more product information please see the link below:
http://nxp.com/documents/data_sheet/PCA9532.pdf