threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
36 lines
1.0 KiB
Plaintext
36 lines
1.0 KiB
Plaintext
Binding for dual-GPIO LED found on Network Space v2 (and parents).
|
|
|
|
Required properties:
|
|
- compatible: "lacie,ns2-leds".
|
|
|
|
Each LED is represented as a sub-node of the ns2-leds device.
|
|
|
|
Required sub-node properties:
|
|
- cmd-gpio: Command LED GPIO. See OF device-tree GPIO specification.
|
|
- slow-gpio: Slow LED GPIO. See OF device-tree GPIO specification.
|
|
- modes-map: A mapping between LED modes (off, on or SATA activity blinking) and
|
|
the corresponding cmd-gpio/slow-gpio values. All the GPIO values combinations
|
|
should be given in order to avoid having an unknown mode at driver probe time.
|
|
|
|
Optional sub-node properties:
|
|
- label: Name for this LED. If omitted, the label is taken from the node name.
|
|
- linux,default-trigger: Trigger assigned to the LED.
|
|
|
|
Example:
|
|
|
|
#include <dt-bindings/leds/leds-ns2.h>
|
|
|
|
ns2-leds {
|
|
compatible = "lacie,ns2-leds";
|
|
|
|
blue-sata {
|
|
label = "ns2:blue:sata";
|
|
slow-gpio = <&gpio0 29 0>;
|
|
cmd-gpio = <&gpio0 30 0>;
|
|
modes-map = <NS_V2_LED_OFF 0 1
|
|
NS_V2_LED_ON 1 0
|
|
NS_V2_LED_ON 0 0
|
|
NS_V2_LED_SATA 1 1>;
|
|
};
|
|
};
|