threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
43 lines
1.2 KiB
Plaintext
43 lines
1.2 KiB
Plaintext
Binding for Qualcomm PM8941 WLED driver
|
|
|
|
Required properties:
|
|
- compatible: should be "qcom,pm8941-wled"
|
|
- reg: slave address
|
|
|
|
Optional properties:
|
|
- default-brightness: brightness value on boot, value from: 0-4095
|
|
default: 2048
|
|
- label: The name of the backlight device
|
|
- qcom,cs-out: bool; enable current sink output
|
|
- qcom,cabc: bool; enable content adaptive backlight control
|
|
- qcom,ext-gen: bool; use externally generated modulator signal to dim
|
|
- qcom,current-limit: mA; per-string current limit; value from 0 to 25
|
|
default: 20mA
|
|
- qcom,current-boost-limit: mA; boost current limit; one of:
|
|
105, 385, 525, 805, 980, 1260, 1400, 1680
|
|
default: 805mA
|
|
- qcom,switching-freq: kHz; switching frequency; one of:
|
|
600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371,
|
|
1600, 1920, 2400, 3200, 4800, 9600,
|
|
default: 1600kHz
|
|
- qcom,ovp: V; Over-voltage protection limit; one of:
|
|
27, 29, 32, 35
|
|
default: 29V
|
|
- qcom,num-strings: #; number of led strings attached; value from 1 to 3
|
|
default: 2
|
|
|
|
Example:
|
|
|
|
pm8941-wled@d800 {
|
|
compatible = "qcom,pm8941-wled";
|
|
reg = <0xd800>;
|
|
label = "backlight";
|
|
|
|
qcom,cs-out;
|
|
qcom,current-limit = <20>;
|
|
qcom,current-boost-limit = <805>;
|
|
qcom,switching-freq = <1600>;
|
|
qcom,ovp = <29>;
|
|
qcom,num-strings = <2>;
|
|
};
|