threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
36 lines
1.4 KiB
Plaintext
36 lines
1.4 KiB
Plaintext
* Mediatek 27xx cirq
|
|
|
|
In Mediatek SOCs, the CIRQ is a low power interrupt controller designed to
|
|
work outside MCUSYS which comprises with Cortex-Ax cores,CCI and GIC.
|
|
The external interrupts (outside MCUSYS) will feed through CIRQ and connect
|
|
to GIC in MCUSYS. When CIRQ is enabled, it will record the edge-sensitive
|
|
interrupts and generate a pulse signal to parent interrupt controller when
|
|
flush command is executed. With CIRQ, MCUSYS can be completely turned off
|
|
to improve the system power consumption without losing interrupts.
|
|
|
|
Required properties:
|
|
- compatible: should be one of
|
|
- "mediatek,mt2701-cirq" for mt2701 CIRQ
|
|
- "mediatek,mt8135-cirq" for mt8135 CIRQ
|
|
- "mediatek,mt8173-cirq" for mt8173 CIRQ
|
|
and "mediatek,cirq" as a fallback.
|
|
- interrupt-controller : Identifies the node as an interrupt controller.
|
|
- #interrupt-cells : Use the same format as specified by GIC in arm,gic.txt.
|
|
- interrupt-parent: phandle of irq parent for cirq. The parent must
|
|
use the same interrupt-cells format as GIC.
|
|
- reg: Physical base address of the cirq registers and length of memory
|
|
mapped region.
|
|
- mediatek,ext-irq-range: Identifies external irq number range in different
|
|
SOCs.
|
|
|
|
Example:
|
|
cirq: interrupt-controller@10204000 {
|
|
compatible = "mediatek,mt2701-cirq",
|
|
"mediatek,mtk-cirq";
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
interrupt-parent = <&sysirq>;
|
|
reg = <0 0x10204000 0 0x400>;
|
|
mediatek,ext-irq-start = <32 200>;
|
|
};
|