threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
49 lines
1.6 KiB
Plaintext
49 lines
1.6 KiB
Plaintext
Marvell Orion SoC interrupt controllers
|
|
|
|
* Main interrupt controller
|
|
|
|
Required properties:
|
|
- compatible: shall be "marvell,orion-intc"
|
|
- reg: base address(es) of interrupt registers starting with CAUSE register
|
|
- interrupt-controller: identifies the node as an interrupt controller
|
|
- #interrupt-cells: number of cells to encode an interrupt source, shall be 1
|
|
|
|
The interrupt sources map to the corresponding bits in the interrupt
|
|
registers, i.e.
|
|
- 0 maps to bit 0 of first base address,
|
|
- 1 maps to bit 1 of first base address,
|
|
- 32 maps to bit 0 of second base address, and so on.
|
|
|
|
Example:
|
|
intc: interrupt-controller {
|
|
compatible = "marvell,orion-intc";
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
/* Dove has 64 first level interrupts */
|
|
reg = <0x20200 0x10>, <0x20210 0x10>;
|
|
};
|
|
|
|
* Bridge interrupt controller
|
|
|
|
Required properties:
|
|
- compatible: shall be "marvell,orion-bridge-intc"
|
|
- reg: base address of bridge interrupt registers starting with CAUSE register
|
|
- interrupts: bridge interrupt of the main interrupt controller
|
|
- interrupt-controller: identifies the node as an interrupt controller
|
|
- #interrupt-cells: number of cells to encode an interrupt source, shall be 1
|
|
|
|
Optional properties:
|
|
- marvell,#interrupts: number of interrupts provided by bridge interrupt
|
|
controller, defaults to 32 if not set
|
|
|
|
Example:
|
|
bridge_intc: interrupt-controller {
|
|
compatible = "marvell,orion-bridge-intc";
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
reg = <0x20110 0x8>;
|
|
interrupts = <0>;
|
|
/* Dove bridge provides 5 interrupts */
|
|
marvell,#interrupts = <5>;
|
|
};
|