threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
34 lines
1.0 KiB
Plaintext
34 lines
1.0 KiB
Plaintext
* SiS I2C Multiple Touch Controller
|
|
|
|
Required properties:
|
|
- compatible: must be "sis,9200-ts"
|
|
- reg: i2c slave address
|
|
- interrupt-parent: the phandle for the interrupt controller
|
|
(see interrupt binding [0])
|
|
- interrupts: touch controller interrupt (see interrupt
|
|
binding [0])
|
|
|
|
Optional properties:
|
|
- pinctrl-names: should be "default" (see pinctrl binding [1]).
|
|
- pinctrl-0: a phandle pointing to the pin settings for the
|
|
device (see pinctrl binding [1]).
|
|
- attn-gpios: the gpio pin used as attention line
|
|
- reset-gpios: the gpio pin used to reset the controller
|
|
- wakeup-source: touchscreen can be used as a wakeup source
|
|
|
|
[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
|
|
[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
|
|
|
|
Example:
|
|
|
|
sis9255@5c {
|
|
compatible = "sis,9200-ts";
|
|
reg = <0x5c>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_sis>;
|
|
interrupt-parent = <&gpio3>;
|
|
interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
|
|
irq-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
|
|
reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
|
|
};
|