threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
32 lines
857 B
Plaintext
32 lines
857 B
Plaintext
* Pixcir I2C touchscreen controllers
|
|
|
|
Required properties:
|
|
- compatible: must be "pixcir,pixcir_ts" or "pixcir,pixcir_tangoc"
|
|
- reg: I2C address of the chip
|
|
- interrupts: interrupt to which the chip is connected
|
|
- attb-gpio: GPIO connected to the ATTB line of the chip
|
|
- touchscreen-size-x: horizontal resolution of touchscreen (in pixels)
|
|
- touchscreen-size-y: vertical resolution of touchscreen (in pixels)
|
|
|
|
Optional properties:
|
|
- reset-gpios: GPIO connected to the RESET line of the chip
|
|
- enable-gpios: GPIO connected to the ENABLE line of the chip
|
|
- wake-gpios: GPIO connected to the WAKE line of the chip
|
|
|
|
Example:
|
|
|
|
i2c@00000000 {
|
|
/* ... */
|
|
|
|
pixcir_ts@5c {
|
|
compatible = "pixcir,pixcir_ts";
|
|
reg = <0x5c>;
|
|
interrupts = <2 0>;
|
|
attb-gpio = <&gpf 2 0 2>;
|
|
touchscreen-size-x = <800>;
|
|
touchscreen-size-y = <600>;
|
|
};
|
|
|
|
/* ... */
|
|
};
|