threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
32 lines
1019 B
Plaintext
32 lines
1019 B
Plaintext
Murata ZPA2326 pressure sensor
|
|
|
|
Pressure sensor from Murata with SPI and I2C bus interfaces.
|
|
|
|
Required properties:
|
|
- compatible: "murata,zpa2326"
|
|
- reg: the I2C address or SPI chip select the device will respond to
|
|
|
|
Recommended properties for SPI bus usage:
|
|
- spi-max-frequency: maximum SPI bus frequency as documented in
|
|
Documentation/devicetree/bindings/spi/spi-bus.txt
|
|
|
|
Optional properties:
|
|
- vref-supply: an optional regulator that needs to be on to provide VREF
|
|
power to the sensor
|
|
- vdd-supply: an optional regulator that needs to be on to provide VDD
|
|
power to the sensor
|
|
- interrupt-parent: phandle to the parent interrupt controller as documented in
|
|
Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
|
|
- interrupts: interrupt mapping for IRQ as documented in
|
|
Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
|
|
|
|
Example:
|
|
|
|
zpa2326@5c {
|
|
compatible = "murata,zpa2326";
|
|
reg = <0x5c>;
|
|
interrupt-parent = <&gpio>;
|
|
interrupts = <12>;
|
|
vdd-supply = <&ldo_1v8_gnss>;
|
|
};
|