threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
29 lines
769 B
Plaintext
29 lines
769 B
Plaintext
Cirrus Logic CLPS711X GPIO controller
|
|
|
|
Required properties:
|
|
- compatible: Should be "cirrus,ep7209-gpio"
|
|
- reg: Physical base GPIO controller registers location and length.
|
|
There should be two registers, first is DATA register, the second
|
|
is DIRECTION.
|
|
- gpio-controller: Marks the device node as a gpio controller.
|
|
- #gpio-cells: Should be two. The first cell is the pin number and
|
|
the second cell is used to specify the gpio polarity:
|
|
0 = active high
|
|
1 = active low
|
|
|
|
Note: Each GPIO port should have an alias correctly numbered in "aliases"
|
|
node.
|
|
|
|
Example:
|
|
|
|
aliases {
|
|
gpio0 = &porta;
|
|
};
|
|
|
|
porta: gpio@80000000 {
|
|
compatible = "cirrus,ep7312-gpio","cirrus,ep7209-gpio";
|
|
reg = <0x80000000 0x1>, <0x80000040 0x1>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|