threeeye
bc1d038eac
Squashed backup commit (no shallow-clone history issues) of xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2 branch, upstream commit 9eece662e) plus all fixes applied to get everpal_defconfig building clean against a modern (GCC 15.2.0) toolchain -- see the previous commit message on the lineage-23.2 branch (also in this repo history is not available here since this is a squashed snapshot; full incremental history lives in the local DL380 checkout and the upstream GitHub remote). Upstream: https://github.com/xiaomi-mt6833-dev/kernel_xiaomi_mt6833 (lineage-23.2)
35 lines
1.0 KiB
Plaintext
35 lines
1.0 KiB
Plaintext
Avionic Design N-bit GPIO expander bindings
|
|
|
|
Required properties:
|
|
- compatible: should be "ad,gpio-adnp"
|
|
- reg: The I2C slave address for this device.
|
|
- interrupt-parent: phandle of the parent interrupt controller.
|
|
- interrupts: Interrupt specifier for the controllers interrupt.
|
|
- #gpio-cells: Should be 2. The first cell is the GPIO number and the
|
|
second cell is used to specify optional parameters:
|
|
- bit 0: polarity (0: normal, 1: inverted)
|
|
- gpio-controller: Marks the device as a GPIO controller
|
|
- nr-gpios: The number of pins supported by the controller.
|
|
|
|
The GPIO expander can optionally be used as an interrupt controller, in
|
|
which case it uses the default two cell specifier as described in
|
|
Documentation/devicetree/bindings/interrupt-controller/interrupts.txt.
|
|
|
|
Example:
|
|
|
|
gpioext: gpio-controller@41 {
|
|
compatible = "ad,gpio-adnp";
|
|
reg = <0x41>;
|
|
|
|
interrupt-parent = <&gpio>;
|
|
interrupts = <160 1>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
|
|
nr-gpios = <64>;
|
|
};
|